Nport 5650-8
Nport 5650-8
NAME | TYPE | VERSION | RELEASE DATE |
---|---|---|---|
Tech Note: Moxa Real TTY Driver Porting Guide for Arm-based Platforms
371.7 KB |
Tech Note | v1.0 | Aug 05, 2021 |
Manual for NPort 5000 Series
17.4 MB |
Manual | v6.2 | Jul 29, 2021 |
Datasheet for NPort 5600 Series
2.7 MB |
Datasheet | v1.5 | Jun 03, 2021 |
QIG for NPort 5600 Series
726.3 KB |
QIG | v5.4 | Jun 01, 2021 |
Ethernet Interface
-
- 10/100BaseT(X) Ports (RJ45 connector) : 1
- Magnetic Isolation Protection : 1.5 kV (built-in)
Ethernet Software Features
-
- Configuration Options : Telnet Console, Web Console (HTTP/HTTPS), Windows Utility
- Management : ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, RFC2217, Rtelnet, PPP, SLIP, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP
- Filter : IGMP v1/v2c
- Windows Real COM Drivers : Windows 95/98/ME/NT/2000, Windows XP/2003/Vista/2008/7/8/8.1/10 (x86/x64), Windows 2008 R2/2012/2012 R2 (x64), Windows Embedded CE 5.0/6.0, Windows XP Embedded
- Linux Real TTY Drivers : Kernel versions: 2.4.x, 2.6.x, 3.x, 4.x, and 5.x
- Fixed TTY Drivers : SCO UNIX, SCO OpenServer, UnixWare 7, QNX 4.25, QNX 6, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X
- Android API : Android 3.1.x and later
- Time Management : SNTP
Serial Interface
-
- Connector : 8-pin RJ45
- No. of Ports : 8
- Serial Standards : RS-232, RS-422, RS-485
- Operation Modes : Disabled, Ethernet Modem, Pair Connection, Real COM, Reverse Telnet, RFC2217, TCP Client, TCP Server, UDP
- Baudrate : Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k
- Data Bits : 5, 6, 7, 8
- Stop Bits : 1, 1.5, 2
- Parity : None, Even, Odd, Space, Mark
- Flow Control : None, RTS/CTS (RS-232 only), DTR/DSR (RS-232 only), XON/XOFF
- Pull High/Low Resistor for RS-485 : 1 kilo-ohm, 150 kilo-ohms
- Terminator for RS-485: 120 ohms
- RS-485 Data Direction Control : ADDC® (automatic data direction control)
Serial Signals
-
- RS-232 : TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND
- RS-422 : Tx+, Tx-, Rx+, Rx-, GND
- RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND
- RS-485-2w : Data+, Data-, GND
Power Parameters
-
- Input Current : 158 mA @ 100 VAC
- Input Voltage : 100 to 240 VAC, 47 to 63 Hz
Reliability
-
- Automatic Reboot Trigger : Built-in WDT
Physical Characteristics
-
- Housing : Metal
- Installation : 19-inch rack mounting
- Dimensions (with ears) : 480 x 45 x 198 mm (18.90 x 1.77 x 7.80 in)
- Dimensions (without ears) : 440 x 45 x 198 mm (17.32 x 1.77 x 7.80 in)
- Weight : 2,310 g (5.09 lb)
Environmental Limits
-
- Operating Temperature : 0 to 60°C (32 to 140°F)
- Storage Temperature (package included) : -20 to 70°C (-4 to 158°F)
- Ambient Relative Humidity : 5 to 95% (non-condensing)
Standards and Certifications
-
- EMI : CISPR 32, FCC Part 15B Class A
- EMC : EN 55032/24
- EMS : IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
IEC 61000-4-4 EFT: Power: 4 kV; Signal: 2 kV
IEC 61000-4-5 Surge: Power: 2.5 kV; Signal: 1 kV
IEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/m
IEC 61000-4-8 PFMF
IEC 61000-4-11 DIPs - Medical : EN 60601-1-2 Class B, EN 55011
- Safety: UL 60950-1
MTBF
-
- Time : 692,010 hrs