English
M-LB-3.150TNC.D
Pepperl+Fuchs M-LB-3.150TNC.D Surge Protection Barrier
Max. surge current (8/20 µs)40 kA
| Ambient temperature | -40 … 80 В°C (-40 … 176 В°F) |
| Mounting | on 35 mm DIN mounting rail acc. to EN 60715:2001 |
| Vibration resistance | EN 60068-2 |
| Overcurrent protection | max. 125 A gG , mains-side |
| Relative humidity | 5 … 95 % |
| Reaction time | max. 25 ns |
| Display elements | status display operating state (green) fault indication (red) |
| Supplementary information | Observe the certificates, declarations of conformity, instruction manuals, and manuals where applicable. For information see www.pepperl-fuchs.com. |
| Device type | type 2 acc. to EN 61643-11 class II acc. to IEC 61643-1 |
| Core cross-section | – min. 1.5 mm2 solid/flexible – max. 35 mm2 stranded/25 mm2 flexible – max. 1.5 mm2 solid/flexible (for remote signalling contact) |
| Connection | terminals 11, 12, 14 |
| Nominal voltage | 120 V AC, 50 … 60 Hz 240 V AC, 50 … 60 Hz |
| Degree of protection | IEC 60529 |
| Number of protected supply lines | 3 |
| Degree of protection | IP20 |
| Mass | approx. 360 g |
| Output | volt-free change-over contact |
| Switch power | AC: 250 V / 0.5 A DC: 250 V/0.1 A; 125 V/0.2 A; 75 V/0.5 A; 24 V/0.5 A |
| Network configuration | TN-C |
| Shock resistance | EN 60068-2 |
| Short-circuit-proof | 50 kA eff |
| Temporary over-voltage | 175 V / 5 s (TOV withstand) |
| Maximum continuous operating voltage | 150 V AC, 50 … 60 Hz |
| Voltage protection level | max. 0.7 kV max. 0.55 kV at 5 kA |
| Nominal discharge current (8/20 µs) | 15 kA |
| Suitable components | protection module M-LB-1.150.M |
| Dimensions | 54 x 90 x 73 mm (2.1 x 3.6 x 2.9 inch) (3 TE acc. to DIN 43880) |
Xem thêm các sản phẩm khác tại đây https://dailydiencongnghiep.com/san-pham/
