AWK-1137C-EU

AWK-1137C-EU

AWK-1137C-EU

WLAN Interface

• WLAN Standards : 802.11a/b/g/n
  802.11i Wireless Security
• Modulation Type : DSSS
  OFDM
  MIMO-OFDM
• Frequency Band for US (20 MHz operating channels) : 2.412 to 2.462 GHz (11 channels)
  5.180 to 5.240 GHz (4 channels)
  5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  5.745 to 5.825 GHz (5 channels)

• Frequency Band for EU (20 MHz operating channels) : 2.412 to 2.472 GHz (13 channels)

  5.180 to 5.240 GHz (4 channels)
  5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.

• Frequency Band for JP (20 MHz operating channels) : 2.412 to 2.484 GHz (14 channels)
  5.180 to 5.240 GHz (4 channels)
  5.260 to 5.320 GHz (4 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
  5.500 to 5.700 GHz (11 channels) DFS (Dynamic Frequency Selection) channel support: In AP mode, when a radar signal is detected, the device will automatically switch to another channel. However, according to regulations, after switching channels, a 60-second availability check period is required before starting the service.
• Wireless Security : WEP encryption (64-bit and 128-bit)
  WPA/WPA2-Enterprise (IEEE 802.1X/RADIUS, TKIP, AES)
  WPA/WPA2-Personal
• Transmission Rate : 802.11b: 1 to 11 Mbps
  802.11a/g: 6 to 54 Mbps
  802.11n: 6.5 to 300 Mbps
• Transmitter Power for 802.11a : 23±1.5 dBm @ 6 to 24 Mbps
  21±1.5 dBm @ 36 Mbps
  20±1.5 dBm @ 48 Mbps
  18±1.5 dBm @ 54 Mbps

• Transmitter Power for 802.11n (5 GHz) : 23±1.5 dBm @ MCS0/8 20 MHz

  18±1.5 dBm @ MCS7/15 20 MHz
  23±1.5 dBm @ MCS0/8 40 MHz
  18±1.5 dBm @ MCS7/15 40 MHz

• Transmitter Power for 802.11b : 26±1.5 dBm @ 1 Mbps
  26±1.5 dBm @ 2 Mbps
  26±1.5 dBm @ 5.5 Mbps
  25±1.5 dBm @ 11 Mbps
• Transmitter Power for 802.11g : 23±1.5 dBm @ 6 to 24 Mbps
  22±1.5 dBm @ 36 Mbps
  20±1.5 dBm @ 48 Mbps
  19±1.5 dBm @ 54 Mbps

• Transmitter Power for 802.11n (2.4 GHz) : 23±1.5 dBm @ MCS0/8 20 MHz

  17±1.5 dBm @ MCS7/15 20 MHz
  23±1.5 dBm @ MCS0/8 40 MHz
  17±1.5 dBm @ MCS7/15 40 MHz

• Receiver Sensitivity for 802.11n (5 GHz; measured at 5.680 GHz) : Typ. -69 dBm @ MCS7 20 MHz
  Typ. -70 dBm @ MCS15 20 MHz
  Typ. -64 dBm @ MCS7 40 MHz
  Typ. -66 dBm @ MCS15 40 MHz
  Note Due to a limitation in the receiver sensitivity performance for channels 153 and 161, it is recommended to avoid using these channels in your critical applications.
• Receiver Sensitivity for 802.11b (measured at 2.437 GHz) : Typ. -89 dBm @ 1 Mbps
  Typ. -89 dBm @ 2 Mbps
  Typ. -89 dBm @ 5.5 Mbps
  Typ. -88 dBm @ 11 Mbps
• Receiver Sensitivity for 802.11g (measured at 2.437 GHz) : Typ. -88 dBm @ 6 Mbps
  Typ. -88 dBm @ 9 Mbps
  Typ. -88 dBm @ 12 Mbps
  Typ. -87 dBm @ 18 Mbps
  Typ. -84 dBm @ 24 Mbps
  Typ. -81 dBm @ 36 Mbps
  Typ. -77 dBm @ 48 Mbps
  Typ. -75 dBm @ 54 Mbps
• Receiver Sensitivity for 802.11n (2.4 GHz; measured at 2.437 GHz) : Typ. -70 dBm @ MCS7 20 MHz
  Typ. -70 dBm @ MCS15 20 MHz
  Typ. -64 dBm @ MCS7 40 MHz
  Typ. -65 dBm @ MCS15 40 MHz
• WLAN Operation Mode : Client, Client-Router, Slave, Sniffer
• Antenna : External, 2/2 dBi, Omni-directional
• Antenna Connectors : 2 RP-SMA female

Ethernet Interface

• 10/100BaseT(X) Ports (RJ45 connector) : 2
• Standards : IEEE 802.3 for 10BaseT
  IEEE 802.3u for 100BaseT(X)
  IEEE 802.1Q for VLAN Tagging

Ethernet Software Features

• Management : DHCP Server/Client, HTTP, IPv4, LLDP, SMTP, SNMPv1/v2c/v3, Syslog, TCP/IP, Telnet, UDP, Proxy ARP, VLAN, Wireless Search Utility, MXview, MXconfig
• Routing : Port forwarding, Static Route, NAT
• Security : HTTPS/SSL, RADIUS, SSH
• Time Management : NTP Client, SNTP Client

Firewall

• Filter : ICMP, MAC address, IP protocol, Port-based

Serial Interface

• Connector : DB9 male
• Serial Standards : RS-232, RS-422/485, RS-232/422/485
• Operation Modes : Disabled, Real COM, RFC2217, TCP Client, TCP Server, UDP
• Data Bits : 5, 6, 7, 8
• Stop Bits : 1, 1.5, 2
• Parity : None, Even, Odd, Space, Mark
• Flow Control : None, RTS/CTS, XON/XOFF
• Baudrate : 75 bps to 921.6 kbps
• Serial Data Log : 256 KB

Serial Signals

• RS-232 : TxD, RxD, RTS, CTS, DCD, GND, DTR, DSR
• RS-422 : Tx+, Tx-, Rx+, Rx-, GND
• RS-485-2w : Data+, Data-, GND
• RS-485-4w : Tx+, Tx-, Rx+, Rx-, GND

LED Interface

• LED Indicators : SYS, LAN1, LAN2, WLAN, Serial

Input/Output Interface

• Buttons : Reset button

Physical Characteristics

• Housing : Metal
• IP Rating : IP30
• Dimensions : 77.1 x 115.5 x 26 mm (3.04 x 4.55 x 1.02 in)
• Weight : 470 g (1.03 lb)
• Installation : DIN-rail mounting, Wall mounting (with optional kit)

Power Parameters

• Input Voltage : 9 to 30 VDC
• Power Connector : 1 removable 3-contact terminal block(s)
• Power Consumption : 11.7 W (max.)
• Reverse Polarity Protection :Supported

Environmental Limits

• Operating Temperature : Standard Models: 0 to 60°C (32 to 140°F)
  Wide Temp. Models: -40 to 75°C (-40 to 167°F)
• Storage Temperature (package included) : -40 to 85°C (-40 to 185°F)
• Ambient Relative Humidity : 5 to 95% (non-condensing)

Standards and Certifications

• EMC : EN 61000-6-2/-6-4, EN 55032/24
• EMI : CISPR 22, FCC Part 15B Class A
• EMS : IEC 61000-4-2 ESD: Contact: 8 kV; Air: 15 kV
  IEC 61000-4-3 RS: 80 MHz to 1 GHz: 10 V/m
  IEC 61000-4-4 EFT: Power: 2 kV; Signal: 1 kV
  IEC 61000-4-5 Surge: Power: 2 kV; Signal: 1 kV
  IEC 61000-4-6 CS: 10 V
  IEC 61000-4-8 PFMF
• Radio : EN 300 328, EN 301 489-1/17, EN 301 893, FCC ID SLE-1137C, ANATEL, MIC, NCC, SRRC, WPC, KC, RCM
• Road Vehicles : E mark E1
• Safety : EN 60950-1, UL 60950-1
• Vibration : IEC 60068-2-6

MTBF

• Time : 1,125,942 hrs