Tiếng Việt
PH0157
IFM Electronic PH0157 Flush pressure sensor
| Product characteristics | |||||||||
|---|---|---|---|---|---|---|---|---|---|
| Output signal | analogue signal | ||||||||
| Measuring range |
|
||||||||
| Process connection | Clamp DN25…DN40 (1…1,5″) DIN 32676 (ISO 2852) | ||||||||
| Application | |||||||||
| Application | flush mountable for the food and beverage industry | ||||||||
| Media | viscous media and liquids with suspended particles; liquids and gases | ||||||||
| Medium temperature [°C] | -25…125; (145 max. 1h) | ||||||||
| Min. bursting pressure |
|
||||||||
| Pressure rating |
|
||||||||
| Type of pressure | relative pressure | ||||||||
| No dead space | yes | ||||||||
| Electrical data | |||||||||
| Operating voltage [V] | 14…30 DC | ||||||||
| Min. insulation resistance [MΩ] | 100; (500 V DC) | ||||||||
| Protection class | III | ||||||||
| Reverse polarity protection | yes | ||||||||
| Inputs / outputs | |||||||||
| Number of inputs and outputs | Number of analogue outputs: 1 | ||||||||
| Outputs | |||||||||
| Total number of outputs | 1 | ||||||||
| Output signal | analogue signal | ||||||||
| Number of analogue outputs | 1 | ||||||||
| Analogue current output [mA] | 4…20 | ||||||||
| Max. load [Ω] | 550; (Ub = 24 V; (Ub – 13 V) / 20 mA) | ||||||||
| Overload protection | yes | ||||||||
| Measuring/setting range | |||||||||
| Measuring range |
|
||||||||
| Analogue start point |
|
||||||||
| Analogue end point |
|
||||||||
| In steps of |
|
||||||||
| Factory setting |
|
||||||||
| Accuracy / deviations | |||||||||
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) | ||||||||
| Characteristics deviation [% of the span] | < ± 0,6; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) | ||||||||
| Linearity deviation [% of the span] | < ± 0,5; (Turn down 1:1) | ||||||||
| Hysteresis deviation [% of the span] | < ± 0,1; (Turn down 1:1) | ||||||||
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) | ||||||||
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,1; (0…80 °C) | ||||||||
| Temperature coefficient span [% of the span / 10 K] | < ± 0,2; (0…80 °C) | ||||||||
| Response times | |||||||||
| Max. response time analogue output [ms] | 3 | ||||||||
| Software / programming | |||||||||
| Parameter setting options | zero point; span | ||||||||
| Interfaces | |||||||||
| Communication interface | EPS | ||||||||
| Operating conditions | |||||||||
| Ambient temperature [°C] | -25…80 | ||||||||
| Storage temperature [°C] | -40…100 | ||||||||
| Protection | IP 67 | ||||||||
| Tests / approvals | |||||||||
| EMC |
|
||||||||
| Shock resistance |
|
||||||||
| Vibration resistance |
|
||||||||
| Mechanical data | |||||||||
| Weight [g] | 540 | ||||||||
| Materials | stainless steel (1.4404 / 316L); PEI; PBT | ||||||||
| Materials (wetted parts) | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE | ||||||||
| Min. pressure cycles | 100 million | ||||||||
| Process connection | Clamp DN25…DN40 (1…1,5″) DIN 32676 (ISO 2852) | ||||||||
| anzeigen-bedienelemente | |||||||||
| Remarks | |||||||||
| Pack quantity | 1 pcs. | ||||||||
| Electrical connection | |||||||||
| Connection | Connector: 1 x M12 | ||||||||
