WIKA 342.11
WIKA 342.11 -Test Gauge – WIKA/Germany
- For gaseous and liquid media that are not highly viscous or crystallising
- Precision measurement in laboratories
- Highest-accuracy pressure measurement
- Testing and calibration of industrial type pressure gauges
- Knife edge pointer and dial with mirror band scale for optimal accuracy of reading
- Precise movement with wear parts of argentan
- Particularly easy-to-read scale due to nominal size 250
- Scale ranges up to 0 … 1,600 bar
Design
per EN 837-1, including transport case and acceptance test certificate (individual listing of the calibration points)
Nominal size in mm
250
Accuracy class
0.1: for scale ranges < 0 … 400 bar
0.25: for scale ranges ≥ 0 … 400 bar
Scale ranges
0 … 1.0 to 0 … 1,600 bar
or all other equivalent vacuum or combined pressure and vacuum ranges
Adjustment medium
≤ 25 bar: Gas
> 25 bar: Water
Pressure limitation
Steady: Full scale value
Fluctuating: 0.9 x full scale value
Permissible temperature
Ambient: -20 … +60 °C
Medium: +100 °C maximum
Temperature effect
When the temperature of the measuring system deviates from the reference temperature (+20 °C):
Max. ±0.1 %/10 K of full scale value
Ingress protection
IP54 per IEC/EN 60529
WIKA 342.11
Design | EN 837-1 |
Nominal size in mm | 250 |
Accuracy class | 0.1: for scale ranges < 0 … 400 bar
0.25: for scale ranges ≥ 0 … 400 bar |
Scale ranges | 0 … 1 to 0 … 1,600 bar
or all other equivalent vacuum or combined pressure and vacuum ranges |
Pressure limitation | Steady: Full scale value
Fluctuating: 0.9 x full scale value |
Permissible temperature | Ambient: -20 … +60 °C
Medium: +100 °C maximum |
Temperature effect | When the temperature of the measuring system deviates from the reference temperature (+20 °C): max. ±0.1 %/10 K of full scale value |
Process connection | Stainless steel
Lower mount (radial) G ½ B (male), SW 22 |
Pressure element | Ni-Fe alloy
< 100 bar: C-type ≥ 100 bar: Helical type |
Movement | Copper alloy, wear parts argentan |
Dial | Aluminium, white, black lettering, scale 330°, with mirror band scale, for zero point setting rotatable by ±15° |
Pointer | Knife edge pointer, aluminium, black |
Case | Flange ring type case, aluminium, black-silver |
Window | Clear non-splintering plastic, green tinted to prevent the dazzle effect |
Options | ■ Other process connection
■ Adjustment medium water with scale ranges ≥ 4 bar ■ Surface mounting flange ■ Suitable for panel mounting (by means of clamp) ■ After-sales service booklet for 3 recalibrations ■ Capsule pressure gauge for low pressures from 0 … 6 mbar (model 612.11, see data sheet PM 06.04) |