English
BMMS M75
Baumer BMMS M75 analog / cable-pull – MAGRES redundant Absolute encoders
| Materials | Encoder housing: aluminium Cable-pull housing: PA6 GF30 Cable: Stainless steel cable sheathed with polyamide |
| Protection DIN EN 60529 | IP 65 (encoder) |
| Consumption typ. | 35 mA (24 VDC, w/o load) |
| Pull-in force | >7 N |
| Instruction | Please consider the assembly instructions |
| Voltage supply | 8…30 VDC |
| Cable diameter | 0.45 mm |
| Reverse polarity protection | Yes |
| Pull-out force | ≤13 N |
| Weight approx. | 900 g |
| Service life | Type >500000 strokes |
| Response time | |
| Interference immunity | DIN EN 61000-6-2 |
| Operating temperature | -40…+85 °C |
| Function | Linear position feedback |
| Bending radius | Cable: >55 mm |
| Cable acceleration | ≤15 m/s² |
| Interface analog | 0…10 V / 0.5…4.5 V / 4…20 mA Resolution: 12 bit |
| Short-circuit proof | Yes |
| manufacter SKU | BMMS M75 analog / cable-pull – MAGRES redundant |
| Emitted interference | DIN EN 61000-6-4 |
| Relative humidity | 95 % temporary condensing |
| Programmable parameters |
Measuring range teachable |
| Special characteristics | Coated electronic |
| Initializing time | ≤500 ms after power on |
| Sensing method | Magnetic |
| Factory setting | Entire measuring range Min. output at 0 m Max. output at 5 m, 7.5 m |
| Resistance | DIN EN 60068-2-6 Vibration 10 g, 10-2000 Hz DIN EN 60068-2-27 Shock 50 g, 11 ms |
| Measuring length | 7500 mm |
| Connection | Connector M12, 5-pin Connector M12, 8-pin Cable 2 m |
| Linearity | 0.2 % of whole measuring range |
| Diagnostic functions | Self-diagnosis Reading back voltage output |
| Repeatability typ. | 3 mm |
Xem thêm các sản phẩm khác tại đây https://dailydiencongnghiep.com/san-pham/
