English
BMMV 58K
Baumer BMMV 58K CANopen® – MAGRES Absolute encoders
| Angular accuracy | ±0.5 ° |
| Function | Multiturn |
| Code sequence | CW default, programmable |
| Relative humidity | 95 % |
| Repeatability | 0.3 ° |
| Operating speed | ≤6000 rpm |
| Number of turns | ≤262144 / 18 bit |
| Approval | UL approval / E217823 |
| Shaft type | ø10 x 20 mm, solid shaft with flat (clamping flange) |
| Diagnostic functions | Multiturn sensing Position error |
| Profile conformity | CANopen® CiA DS 301, DSP 305, DS 406 |
| manufacter SKU | BMMV 58K CANopen® – MAGRES |
| Interface | CANopen® |
| Connection | Connector M12, 5-pin Cable |
| Emitted interference | DIN EN 61000-6-3 |
| Code | Binary |
| Initializing time typ. | 500 ms after power on |
| Weight approx. | 300 g |
| Size (flange) | ø58 mm |
| Operating temperature | -40…+85 °C (see general informations) |
| Sensing method | Magnetic |
| Steps per turn | ≤4096 / 12 bit |
| Consumption w/o load | ≤80 mA (24 VDC) |
| Protection DIN EN 60529 | IP 65 (without shaft seal) IP 67 (with shaft seal) |
| Flange | Clamping flange |
| Resistance | DIN EN 60068-2-6 Vibration 30 g, 10-2000 Hz DIN EN 60068-2-27 Shock 500 g, 6 ms |
| Programmable parameters |
Operating modes Total resolution Scaling |
| Voltage supply | 10…30 VDC |
| Interference immunity | DIN EN 61000-6-2 |
| Admitted shaft load | ≤40 N axial ≤80 N radial |
| Materials | Housing: steel zinc-coated Flange: aluminium Solid shaft: stainless steel |
| Starting torque | ≤2 Ncm (+20 °C, IP 65) ≤2.5 Ncm (+20 °C, IP 67) |
Xem thêm các sản phẩm khác tại đây https://dailydiencongnghiep.com/san-pham/
