EI-0D2-10Y-10B Intrinsically safe Ethernet Isolator
- Galvanic Isolation I.S. to non-I.S. Port
- 10/100 Mbit/s according to IEEE 802.3/.3u
- Installation in Zone 2, Ethernet in Zone 1 or Zone 0
- Standard Ethernet patch or crossover cable
- DIN-Rail mounted and OEM Version
Shock resistance15 g 11 ms EI-0D2-10Y-10B
Relative humidity | 95 % non-condensing |
Non-intrinsically safe port | 10 BASE-T/100 BASE-TX |
Storage temperature | -40 ..85 В°C (-40 ..185 В°F) |
Core cross-section | up to 2.5 mm2 |
LED ACT | yellow: communication active |
Rated voltage | 19.2 .. 35 V DC |
Total cable length | typ. 200 m/20 В°C |
Connection type | Terminals |
Mass | 195 g |
Ambient temperature | -40 .. 60 В°C (-40 ..40 В°F) |
Power dissipation | 3 W |
Vibration resistance | 1 g 10 .. 150 Hz |
Pollution degree | max. 2, according to IEC 60664 |
Connection type | 2 x RJ-45 , IEC 60603-7 |
Operating mode | Half/Full Duplex |
I.S. cable length | typ. 100 m/20 В°C |
Housing material | Polyamide PA 66 |
CSA approval | CSA 15.70016295 |
Vibration resistance | EN 60068-2-6 |
IECEx approval | IECEx PTB 09.0053X |
Ethernet | IEEE 802.3 , IEEE 802.3u |
EU-Type Examination Certificate | PTB 07 ATEX 2025 X |
Mounting | DIN rail mounting |
Number of isolators | max. 2 in series connection |
Degree of protection | IP20 according to EN 60529 |
Galvanic isolation | EN 50020 |
LED 10/100 | yellow ON: Transfer rate 100 Mbit/s , OFF: 10 Mbit/s |
Climatic conditions | DIN IEC 721 |
LED PWR | green: Power on |
Intrinsically safe port | 10 BASE-T/100 BASE-TX |
Cable type | CAT5e S/FTP AWG 24, Installation cable, L/R ratio max. 10 ВµH/and Omega; of all strand combinations |
Degree of protection | IEC 60529 |
Transfer rate | 10/100 Mbit/s , Auto-Negotiation |
Shock resistance | EN 60068-2-27 |
Connector pinout | socket ; TIA/EIA-568-B |
Patents | This product may be covered by the following patent: US7,687,791 |
Rated current | 150 ..100 mA |
Xem thêm các sản phẩm khác tại đây https://dailydiencongnghiep.com/san-pham/