English
EI-0D2-10Y-10B-Y1 Intrinsically safe Ethernet Isolator
EI-0D2-10Y-10B-Y1
- Galvanic Isolation I.S. to non-I.S. Port
- 10/100 MBit/s according to IEEE 802.3/.3u
- Installation in Zone 2, Ethernet in Zone 1 or Zone 0
- Standard Ethernet patch or crossover cable
- DIN-Rail mounted and OEM Version
EC-Type Examination CertificatePTB 07 ATEX 2025 X
| Relative humidity | 95 % non-condensing |
| Climatic conditions | DIN IEC 721 |
| Total cable length | typ. 200 m/20 В°C |
| Housing material | Polyamide PA 66 |
| Operating mode | Half/Full Duplex |
| Power dissipation | 3 W |
| LED 10/100 | yellow ON: Transfer rate 100 MBit/s , OFF: 10 MBit/s |
| Storage temperature | -40 … 85 В°C (-40 … 185 В°F) |
| Transfer rate | 10/100 Mbit/s , Auto-Negotiation |
| Ambient temperature | -20 … 55 В°C (-4 … 131 В°F) |
| Connection type | 2 x RJ-45 , IEC 60603-7 |
| Cable type | CAT5e S/FTP AWG 24, Installation cable, L/R ratio max. 10 ВµH/andOmega; of all strand combinations |
| Patents | This product may be covered by the following patent: US7,687,791 |
| Shock resistance | 15 g 11 ms |
| Rated current | 150 … 100 mA |
| Shock resistance | EN 60068-2-27 |
| Galvanic isolation | EN 50020 |
| Degree of protection | IEC 60529 |
| Mounting | DIN rail mounting |
| Rated voltage | 19.2 … 35 V DC |
| Ethernet | IEEE 802.3 , IEEE 802.3u |
| Connection type | Terminals |
| Vibration resistance | 1 g 10 … 150 Hz |
| Number of isolators | max. 2 in series connection |
| Intrinsically safe port | 10 BASE-T/100 BASE-TX |
| LED PWR | green: Power on |
| Vibration resistance | EN 60068-2-6 |
| Connector pinout | socket ; TIA/EIA-568-B |
| Mass | 195 g |
| Degree of protection | IP20 according to EN 60529 |
| LED ACT | yellow: communication active |
| I.S. cable length | typ. 100 m/20 В°C |
| Core cross-section | up to 2.5 mm2 |
| Non-intrinsically safe port | 10 BASE-T/100 BASE-TX |
| Pollution degree | max. 2, according to IEC 60664 |
Xem thêm các sản phẩm khác tại đây https://dailydiencongnghiep.com/san-pham/
