FB6308B2

FB6308B2

Liên hệ để biết giá

FB6308B2 Digital Output with Shutdown Input

Item Number: FB6308B2

8-channel
Outputs with plug-in Ex e terminals
Installation in suitable enclosures in Zone 1
Module can be exchanged under voltage (hot swap)
Line fault detection (LFD)
Positive or negative logic selectable
Simulation mode for service operations (forcing)
Permanently self-monitoring
Output with watchdog
Output with bus-independent safety shutdown input
Output with bus-independent safety shutdown

LED indication LED green: supply
LED red: line fault , red flashing: communication error

Damaging gas	EN 60068-2-42:2003
Storage temperature	-25 … 85 В°C (-13 … 185 В°F)
Supplementary information	EC-Type Examination Certificate, Statement of Conformity, Declaration of Conformity, Attestation of Conformity and instructions have to be observed where applicable. For information see www.pepperl-fuchs.com.
Ambient temperature	-20 … 60 В°C (-4 … 140 В°F)
Vibration resistance	frequency range 10 … 150 Hz; transition frequency: 57.56 Hz, amplitude/acceleration В± 0.075 mm/1 g; 10 cycles frequency range 5 … 100 Hz; transition frequency: 13.2 Hz amplitude/acceleration В± 1 mm/0.7 g; 90 minutes at each resonance
Coding	optional mechanical coding via front socket
Power dissipation	2.35 W
Dimensions	57 x 107 x 132 mm (2.2 x 4.2 x 5.2 inch)
Rated voltage	12 V DC , only in connection with the power supplies FB92**
Occupied slots	2
Shock resistance	EN 60068-2-27:2009
Relative humidity	EN 60068-2-78:2001
Interface	manufacturer-specific bus to standard com unit
Power consumption	2.35 W
Open loop voltage	20 V
Response time	20 ms (depending on bus cycle time)
Connection	Ex e spring terminal with protective cover
Connection	channel I: 1+, 2-; channel II: 3+, 4-; channel III: 5+, 6-; channel IV: 7+, 8-; channel V: 9+, 10-; channel VI: 11+, 12-; channel VII: 13+, 14-; channel VIII: 15+, 16-
Line fault detection	can be switched on/off for each channel via configuration tool
Connection	backplane bus
System information	The module has to be mounted in appropriate backplanes (FB92**) in Zone 1, 2, or outside hazardous areas. Observe the corresponding EC-type examination certificate.
INMETRO	Brazil: TГњV 14.1599X
Number of channels	8
Electromagnetic compatibility	NE 21:2007
Damaging gas	designed for operation in environmental conditions acc. to ISA-S71.04-1985, severity level G3
Vibration resistance	EN 60068-2-6:2008
EU-Type Examination Certificate	BVS 11 ATEX E 093 X
Relative humidity	95 % non-condensing
Degree of protection	IP20 (module) , a separate housing is required acc. to the system description
Environmental test	EN 60068-2-14:2009
Current limit	8 mA
Connection	backplane bus
Shock resistance	shock type I, shock duration 11 ms, shock amplitude 15 g, number of shocks 18
ATEX approval	BVS 11 ATEX E 093X
Degree of protection	IEC 60529:2000
Mass	approx. 750 g
Watchdog	within 0.5 s the device goes in safe state, e.g. after loss of communication