English
Suffix code
| Model | Code | Information | |||||
| UP | 25 | F- | 8 |  |
|
|
inductive type proximity sensor |
| Sensing area size | 25 | please refer to the dimension (25 x 49 x 10 mm) | |||||
| Structure type | F | Flat type | |||||
| Sensing distance | 8 | 8 mm | |||||
| Power and Output type | N | D.C NPN output | |||||
| P | D.C PNP output | ||||||
| A | A.C 2 wire type | ||||||
| T | D.C 2 wire type(Polarity) | ||||||
| U | D.C 2 wire type (No polarity) | ||||||
| Output state | A | Normal open(N.O) | |||||
| C | Normal close(N.C) | ||||||
| Connection structure | * | No indication (Cable type) | |||||
| CR | Relay connector | ||||||
· Specification
| Inductive D.C 3 wire type/2 wire type |
| Model | D.C 3 wire type | D.C 2 wire type | |||
| NPN | UP25F-8N |
Polarity | UP25F-8T |
||
| PNP | UP25F-8P |
No Polarity | UP25F-8U |
||
| Size | 25 X 49 Flat type | 25 X 49 Flat type | |||
| Standard sensing object(㎜) | Iron 25 X 25 X 1 | ||||
| Sensing distance | 8 mm | ||||
| Setting distance | 0 ~ 6.4mm | ||||
| Hysteresis | Less than 10% of sensing distance | ||||
| Response frequency | 200 Hz | ||||
| Power supply voltage | 12 – 24 V a.c (Usable voltage range 5 – 35 V d.c) |
12 – 24 V a.c (Usable voltage range 10 – 30 V d.c) |
|||
| Control output | Open/Close capacitance | 200 ㎃ max (Resistive load) | 100 ㎃ max (Resistive load) | ||
| Residual voltage | Max 1.5 V | Polarity : max 3.5 V, No polarity : max 5 V | |||
| Current consumption | Max 6 mA | – | |||
| Leakage current | – | Max 1 mA | |||
| Operation indication | Red LED | ||||
| Protective circuit | Power reversely connected protective circuit, Surge protective circuit and over current protective circuit are built in. |
||||
| Degree of protection | IP67 (IECstandard) | ||||
| Connection structure | Cable type(Standard cable length 2m), Relay connector type | ||||
| Material | Case : PBT resin, Cable holder : Polyester elastomer | ||||
| Weight | Cable type | approx. 60g | approx. 60g | ||
| Relay connector type | approx. 20g | approx. 20g | |||
| Inductive A.C 2 wire type |
| Model | UP25F-8A |
|
| Standard sensing object(㎜) | Iron 25 x 25 x 1 | |
| Sensing distance | 8 mm | |
| Setting distance | 0 ~ 6.4mm | |
| Hysteresis | Less than 10% of sensing distance | |
| Response frequency | 20 Hz | |
| Power supply voltage | 100 – 240 V a.c (Usable voltage range 90 – 250 V a.c ) | |
| Control output | Open/Close capacitance | 200 mA max (Resistive load) |
| Residual voltage | Max 10 Va.c | |
| Leakage current | Max 2.2 mA | |
| Operation indication | Red LED | |
| Protective circuit | Surge protective circuit built in. | |
| Degree of protection | IP67 (IEC standard) | |
| Connection structure | Cable type(Standard cable length 2m), Relay connector type | |
| Material | Case : PBT resin, Cable holder : Polyester elastomer | |
| Weight | Cable type | approx. 60g |
| Relay connector type | approx. 20g | |
