Type | Types of tip (L-type, straight-type) Built-in protective glass (Straight type is optional) |
Weight | 460 g (L-type mounted) 395 g (Straight-type mounted) |
Shield gas | Argon, nitrogen |
Welding conditions | Manually select among 90 types (waveform No. 0 – 120)(waveform No. 0 – 74: standard conditions configured) |
Accessories | ① Stand for hand-held torch: x 1 ② Protective gloves (leather): 1 set ③Protective gloves (conductive fiber): 5 sets ④ Protective glass (Φ12 mm, 2 mm thick): x 10 ⑤ Nozzle (Carbon, outer Φ7 mm, inner Φ5 mm, 20 mm long): x 50 ⑥ Nozzle (Carbon, outer Φ7 mm, inner Φ5 mm, 12 mm long): x 10 ⑦ Dust mask: 20 ⑧ Simple clean booth: 1 set |
NOTE) Do not weld laser beam high-reflectivity workpieces such as titanium and copper.
Otherwise, a burn may be caused by strong reflected beams.
【Oscillator: ML-3060AS】
Oscillator | Maximum rated output (from oscillator) |
REPEAT mode | 600W |
CW mode | 550W | ||
Maximum peak power (from oscillator) |
REPEATmode | Maximum: 5.500kW Minimum (power feedback ON): 1.000kW Minimum (power feedback OFF): 600W |
|
CWmode | Maximum: 550W Minimum (power feedback ON): 100W Minimum (power feedback OFF): 60W |
||
Pulse width | REPEAT mode | Standard: 0.2–50.00 ms (0.1ms steps) [Energy (J)] x [Repetition (pps)] = 600 W or less However, the pulse energy is 60 J or less and the DUTY is 50% or less. Note: When using the output waveform of 1.200 kW, the pps value is limited to keep the average power below 600 W. As a result, the duty ratio becomes 50% or less. Also, when outputting a waveform with a shot (SHOT = 1), the READY signal is automatically turned off for certain time after laser output to keep the average power below 600 W, and the next laser start is not accepted. |
|
CW mode | Standard: 0.1–1000.0 s (0.1s steps) | ||
Repeated number of pulse/modulation | 1–1000 pps (REPEAT mode) | ||
Modulation function | 1–5000 Hz (rectangular wave, triangular wave, sinusoidal wave) (CW mode) | ||
Oscillation wavelength | 1070±3nm | ||
Safety shutter | With open/close sensor | ||
Positioning guide beam | Built-in visible laser (Red) | ||
Prevention of reflected beam | Built-in reflected beam sensor | ||
Output stability | ±2% or less@600 W per 4 hours (constant temperature) | ||
Power Supply | Power Supply | Input power supply | Single-phase, 200 V to 240 V AC (+10%/-15%) |
Frequency | 50/60Hz | ||
Max. input current | 23A(200V), 21A(220V), 19A(240V) | ||
Max. apparent power | 3.8kVA | ||
Power consumption | Maximum | 3.5kW | |
Standby | 0.2kW | ||
Breaker rated curren | 30A | ||
Dimensions | 750(W)×750(D)×1250(H)mm | ||
Weight | 250kg or less |