GR200 Touch panel Graphic recorder

– Touch panel 5.7 Inch 640 x 480 TFT-LCD
– Universal input ( Thermocouple, RTD, VDC )
– Trend view mode available
– 80M byte internal memory and support SD/SDHC memory card
– RS 485/422 communication

Suffix code

Model	Code			Information
GR200-				Graphic recorder
Input channel	2			2 channel
	4			4 channel
	8			8 channel
	12			12 channel
External contact input & output (DI / DO)		N		None
		1		DI 2 contacts + DO 6 contacts (relay)
		2		DI 4 contacts + DO 12 contacts (relay)
Communication function			0	RS 422/485

· Specification

[ Power input ]

Power voltage	100 – 240 V a.c. Voltage fluctuation rate ±10 %
Power frequency	50 – 60 ㎐
Power consumption	22 VA max
Maximum internal fuse ratings	250 V a.c.
Internal voltage	Primary terminal* and secondary terminal** : Minimum 1500 VAC for 1 minute Primary terminal* and FG terminal : Minimum 1500 VAC for 1 minute Secondary terminal** and FG terminal : Minimum 1500 VAC for 1 minute Secondary terminal** and secondary terminal** : Minimum 500 VAC for 1 minute * Primary terminal : Power terminal (except the FG terminal) and the relay output terminal ** Secondary terminal : Sensor input terminal, contact input terminal, communication terminal
Insulation resistor	20 ㏁ between the power terminal and the FG terminal or 500 VDC

[ Sensor input ]

Number of channels	2, 4, 8, 12 (Refer to the type configuration)
Input type	2 thermoresistors (Pt-100, KPt-100) 12 thermocouples (K, J, E, T, R, B, S, L, N, U, Wre 5-26, PL-II) 4 V d.c. (-10 – 20 mV, 0 – 100 mV, 1 – 5V, 0 – 30 V)
Sampling period	250 ㎳
Current to measure the thermoresistor (RTD)	About 0.21 ㎃
Input resistor	Thermocouple : More than 1 ㏁, VDC : More than 1 ㏁
Allowable wiring resistor	Thermoresistor : Maximum 100Ω/wire (The RTD is up to 10Ω/wire for the range of -100.00 – .150.00) Thermocouple : Less than 200 Ω VDC : Less than 2 ㏀
Impact of the wiring resistor	Thermoresistor : ±0.3 °C/10 Ω (The 3 lines have the same wiring resistors)
Allowable input voltage	Thermocouple : Less than ±10 V d.c., VDC : Less than ±33 V d.c.
Degree	±0.15% of F.S, ±1 digit (Except the RJC temperature error)    ※ Refer to the input table
The error in the reference junction compensation (RJC)	±1.5 ℃ (0 ~ 50 ℃)
Sensor short detection (Burn-out)	UP-Scale for the short

[ Contact input ]

Maximum input	4
Input method	No voltage contact input
On/Off detection resistor	Consider on less than 1 ㏀ minimum and off larger than 10 ㏀
Minimum detection time	0.25 second

[ Alarm output ]

Maximum number of outputs	12
Output type	Relay output
Maximum ratings	5 A 250 V a.c., 5 A 30 V d.c.
Recommended ratings	3 A 250 V a.c., 3 A 30 V d.c.
Relay life	50,000 times at the maximum ratings, 100,000 times at the recommended ratings

• The sensor input terminal is insulated among the input channels. It is insulated with the relay output terminal, the contact input terminal and the communication terminal. • The relay output terminal is not insulated among the output terminals. It is insulated with the contact    input terminal and the communication terminal. • The contact input terminal is not insulated among the input terminals. In addition, it is not insulated with the communication terminal. • The power terminal is insulated with other input and output terminals and the internal circuit. • The FG terminal is insulated with other input and output terminals and the internal circuit. [ Display specification ] Display TFT color LCD (115.2 × 86.4 ㎜, resolution : 640 × 480 pixel, LED Backlight) Backlight life 40,000 hours Language in use Korean, English, Chinese (simplified/traditional) [ Communication specification ] RS-422/485 communication Communication speed: 9600 bps ~ 115200 bps Protocol: PCLINK, PCLINK+SUM, MODBUS ASCII, MODBUS RTU [ Memory specification   ] Save function Internal memory – volatile memory : 900 KB – Save up to 4 hours with the interval of 1 second – Non-volatile memory : 80 MB – Save up to 15 days with the interval of 1 second External memory SD card (2GB) : Save up to a year with the interval of 1 second ※ Support the SDHC storage cycle user settings (1, 2, 5, 10, 20, 30, 60, 120 second) memory information Measurement value by channel, disconnection, DI (contact input), ALARM, relay output status [ use environment   ] Ambient temperature 0 ~ 50 ℃ Temperature change 10 ℃/h below Ambient humidity 20 ~ 90 % RH (no condensation) Magnetic field  400 A/m below Altitude Less than 2,000 m above the sea level Weight About 1.32 kg [ storage environment   ] Ambient temperature -20 ~ 70 ℃ temperature change Less than 20 °C/h Ambient Humidity 5 – 95 % RH (no condensation) [ Influence of ambient temperature   ] DC voltage, thermocouple sensor ±0.00 3% of F.S / ℃ RTD sensor ±0.03 ℃/℃ [ Range configuration for the input types ] Input type Measurement range(°C) Measurement range(°F) Degree Thermoresistor (RTD) Pt100Ω Pt-0 -200 ~ 640 -300 ~ 1180 ±0.15 % of F.S ±1digit Pt-1 -1 -200.0 ~ 640.0 -300.0 ~ 1180.0 Pt-2 -200.00 ~ 640.00 -300.0 ~ 1180.0 KPt100Ω KPt-0 -200 ~ 500 -300 ~ 1000 KPt-1 -200.0 ~ 500.0 -300.0 ~ 1000.0 KPt-2 -100.00 ~ 150.00 -300.0 ~ 1000.0 Thermocouple (TC) K K-0 -200 ~ 1370 -300 ~ 2500 ±0.15 % of F.S ±1digit K-1 -200.0 ~ 1370.0 -300 ~ 2500 ±0.15 % of F.S ±1digit(*2) J -200.0 ~ 1200.0 -300 ~ 2300 ±0.15 % of F.S ±1digit(*2) E -200.0 ~ 1000.0 -300 ~ 1800 ±0.15 % of F.S ±1digit(*2) T -200.0 ~ 400.0 -300 ~ 750 ±0.15 % of F.S ±1digit(*3) R 0.0 ~ 1700.0 0 ~ 3100 ±0.15 % of F.S ±1digit(*4) B 0.0 ~ 1800.0 0 ~ 3300 ±0.15 % of F.S ±1digit (*1) S 0.0 – 1700.0 0 ~ 3100 ±0.15 % of F.S ±1digit(*4) L -200.0 ~ 900.0 -300 ~ 1300 ±0.15 % of F.S ±1digit(*2) N -200.0 ~ 1300.0 -300 ~ 2400 ±0.15 % of F.S ±1digit(*3) U -200.0 ~ 400.0 -300 ~ 750 ±0.15 % of F.S ±1digit(*3) Wre 5-26 0.0 ~ 2300.0 0 ~ 4200 ±0.15 % of F.S ±1digit(*4) PL-Ⅱ 0.0 ~ 1390.0 0 ~ 2500 ±0.15 % of F.S ±1digit VDC -10 – 20 ㎷ -10.00 ~ 20.00 ±0.15 % of F.S ±1digit * The current input (4~20㎃ DC) is available when you use resistance 250Ω (0.5W/0.1%) on input terminals 0 – 100 ㎷ 0.00 ~ 100.00 1 – 5 V 1.00 ~ 5.00 0 – 30 V 0.00 ~ 30.00  (*1) 0 ~ 400℃ : ±5% of F.S ± 1digit  (*3) -200 ~ -150℃ : ±0.4% of F.S ± 1digit  (*2) -200 ~ -150℃ : ±0.2% of F.S ± 1digit        -150 ~ -100℃ : ±0.2% of F.S ± 1digit  (*4) 0 ~ 200℃ : ±0.2% of F.S ± 1digit