English
Baumer HOG 16 + DSL.E Incremental encoders
| Operating temperature | -20…+85 °C |
| Switching delay time | ≤40 ms |
| Shaft type | ø20…50 mm (through hollow shaft) |
| Speed (n) | ≤6000 rpm |
| Range of switching speed (ns) | Pulses = 512: ±16…6000 rpm Pulses = 1024: ±8…6000 rpm Pulses = 2048: ±4…3500 rpm Pulses = 2500: ±3…2900 rpm |
| Reference signal | Zero pulse, width 90° |
| Interface | RS485 |
| Rotor moment of inertia | 4.9 kgcm² |
| Approval | CE |
| Output stages | HTL TTL/RS422 |
| Materials | Housing: aluminium Shaft: stainless steel |
| Scan ratio | 40…60 % |
| Interference immunity | EN 61000-6-2 |
| Output frequency | ≤120 kHz |
| Output switching capacity | 5…230 VAC/VDC; 5…250 mA |
| HOG 16 + DSL.E output signals | K1, K2, K0 + inverted |
| Connection | 2x terminal box 3x terminal box (with option M) |
| Consumption w/o load | ≤200 mA |
| Weight approx. | 4 kg 5 kg (with option M) |
| Operating torque | ≤15 Ncm |
| Resistance | IEC 60068-2-6 Vibration 15 g, 10-2000 Hz IEC 60068-2-27 Shock 300 g, 6 ms |
| Switching accuracy | ±2 % (Digit) |
| manufacter SKU | HOG 16 + DSL.E |
| Phase shift | 90° ±20° |
| Voltage supply | 9…30 VDC |
| Admitted shaft load | ≤450 N axial ≤600 N radial |
| Pulses per revolution | 512…2500 |
| Switching outputs | 2 outputs, speed control 1 control output |
| Protection DIN EN 60529 | IP 66 |
| Sensing method | Optical |
| Emitted interference | EN 61000-6-3 |
| Size (flange) | ø158 mm |
