HPAN series

HPAN series

Liên hệ để biết giá

Suffix code

Model	Code	Information
HPAN-		SENSOR CONTROLLER
Function	C7	General controller
	C7W	2 Channel controller
	CT7	High function controller

· Specification

Function

Common

High function (timer)

Connecting 2 internal sensors

2 input 1 output

2 input 2 output

Model

HPAN-C7

HPAN-CT7

HPAN-C7W

Power supply voltage

100 – 240 V a.c (50/60 Hz) ±10 %

Power consumption

About 5 VA

Power for sensor

12 d.c (± 10 % ), 200 mA Max.

Input

[H]level 4 – 30 V d.c, [L] level 0 – 2 V d.c

Pull up/ Pull down resistance connection (4.7kΩ) by NPN/PNP switch setting

Inversion function of NORM INV input signal

Control
Output

Contact

OUT

OUT1, OUT2

NO contact : 250 V a.c 3A resistance load, NC contact 250 V a.c 2A resistance load,

Rated load lifetime : above 100 thousand times.

None
Contact

O.C OUT

–

NPN open collector MAX 30 V d.c, 100 mA

*ISOLATION (isolated with inner circuit)

Output Response speed

Relay contact : approximately 10 ms

NPN open collector : less than 5 µs

–

Operation mode

IN, ES AND function operation

AND trigger function operation

–

Timer function

–

3 types of timer set up mode

(ON DELAY, OFF DELAY,

ONE SHORT DELAY)

time set up function(min – max)

–

Ambient temp. humidity

-10 ~ 55 °C, 35 ~ 85% R.H. (Freezing, dew not allowed)

Max noise

Square wave noise due to noise simulator (1 µs pulse per 16 ns) /
±2 kV (insert into power input terminal)

Dielectric strength

1 minute within 1500 V a.c, 60 Hz

Insulation resistance

10MΩ (500 V d.c mega between the power and the output)

Max Vibration

10 ~ 55 Hz double amplituded 0.75 mm X · Y · Z 2 hour for each direction(when power turned OFF)

Max Impaction

100 m/s² (approximately 10 G), X · Y · Z 2 hour for each direction(when power turned OFF)

Weight

approximately 160g

* attention, given weight above did not included weight of BOX

* (ES : IN1 / IN2)

Sản phẩm tương tự

Đăng nhập