English
ICF-1170I-M-ST-T
ICF-1170I-M-ST-T: Bộ chuyển đổi tín hiệu CanBus sang quang
- Khoảng cách truyền lên tới 2 km qua đường cáp quang
- Chuyển đổi tín hiệu CAN sang quang và ngược lại
- Tốc độ truyền lên đến 1 Mbps
- Dự phòng đầu vào nguồn điện kép
- DIP switch cho điện trở 120 ohm
- DIP switch cho fiber test mode
- Nhiệt độ hoạt động rộng từ -40 đến 85°C
- Hoạt động tương thích qua tiêu chuẩn ISO 11898
| NAME | TYPE | VERSION | RELEASE DATE |
|---|---|---|---|
| QIG for ICF-1170I Series
1.3 MB |
QIG | v6.1 | May 04, 2021 |
| Datasheet for ICF-1170I Series
706.2 KB |
Datasheet | v1.2 | Dec 24, 2020 |
| Tech Note for ICF-1170I Series
202.7 KB |
Tech Note | v1.0 | Apr 20, 2020 |
| 2D CAD for ICF-1170I
293.2 KB |
2D CAD | May 20, 2016 |
| • CAN Communication | |
| CAN Interface | ISO 11898-2, Terminals (CAN_H, CAN_L,CAN_GND) |
| Protocols | CAN 2.0A and 2.0B (ISO 11898-2) |
| Connector Type | 3-pin removable screw terminal x1 |
| Termination Resistor | Dip switch selector for 120 Ω terminal resistor |
| Transfer Rate | Up to 1 Mbps |
| System Delay | 150 ns |
| Isolation Protection | 2 kV |
| Transmission Distance | Max 2 km (depends on the data rate and the protocol used) Note: The transmission distance is limited by the signal rate, as indicated in the ISO 11898-2 standard. |
| LED Indicators | PWR1, PWR2, Fiber TX, Fiber RX |
| • Fiber Communication | |
| Connector Type | ST (multi-mode) fiber ports |
| Fiber Cable Requirements |  |
| • Physical Characteristics | |
| Housing | Metal |
| Dimensions | 30.3 x 70 x 115 mm (1.19 x 2.76 x 4.53 in) |
| Weight | 178 g (0.39 lb) |
| • Environmental Limits | |
| Operating Temperature | Standard Models: 0 to 60°C (32 to 140°F) Wide Temp. Models: -40 to 85°C (-40 to 185°F) |
| Storage Temperature | -40 to 85°C (-40 to 185°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| • Power Requirements | |
| Input Voltage | 12 to 48 VDC dual power for redundant power |
| Input Current | ICF-1170I: 221 mA @ 12 VDC Alarm Contact: 1 relay output with current-carrying capacity of 1 A @ 24 VDC |
| Voltage Reversal Protection | Protects against V+/V- reversal |
| Overcurrent Protection | 1.1 A (protects against two signals shorted together) |
• Standards and Certifications |
|
| Safety | UL 508 |
| EMC | EN 55032/24 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | EN 61000-4-2 (ESD): Contact: 8 kV; Air: 15 kV EN 61000-4-3 (RS): 80 MHz to 1 GHz: 3 V/m EN 61000-4-4 (EFT): Power: 4 kV; Signal: 2 kV EN 61000-4-5 (Surge): Power: 2 kV; Signal: 1 kV EN 61000-4-6 (CS): 150 kHz to 80 MHz: 3 V/m EN 61000-4-8 (PFMF) |
| Green Product | RoHS, CRoHS, WEEE |
| Freefall | IEC 60068-2-32 |
| • MTBF (mean time between failures) | |
| Time | 792,085 hrs |
| Standard | Telcordia (Bellcore), GB |
