ML-5120A

ML-5120A

Liên hệ để biết giá

Model		ML-5120A
Maximum rated output (from oscillator)		120W
Output control (Pulse/CW switching allowed)	Pulse width	0.1～500ms
	Pulse repetition rate	1～5000pps
	CW output	1～10000sec
Modulation function		1 to 5000 Hz (rectangular wave, triangular wave, sinusoidal wave) (CW mode)
Wavelength		915±15nm
Safety shutter		With open/close sensor
Positioning guide beam		Built-in visible laser (red)
Output stability		± 3% less @10W or more (Ambient temperature± 5℃within)
Temperature control function		Laser is operated by ON/OFF control action with monitering temperature at focal point. * This function is available for focusing units ” FOCH-30B series”.
Maximum energy sharing		Up to 2 deliveries of laser output, including powersharing,are available.(Option)
No. of schedules		256
Measurement function		Laser energy (J), Average power (W)
Control Panel	Counter	Displays the total number of outputs (9 digits)
		Displays the number of acceptable outputs (9 digits)
		Displays the total LD ON time (7 digits)
		Displays the laser output time (7 digits)
Power requirements	Without cooler	Single-phase, 200 V to 240 V AC (+6% /-10%) 50/60Hz
	With cooler (option)	Single-phase, 180 V to 220 V AC When the input power supply exceeds 220 V in the model with cooler, use an insulation transformer to keep the voltage within specifications.
Power consumption	Without cooler	Maximum：0.7kW (Standby：0.2kW)
	With cooler (option)	Maximum：1.1kW (Standby：0.5kW)
Max. apparent power	Without cooler	800VA
	With cooler (option)	1100VA
External datacom		RS-485
Heat exchange method		Fully air cooled
Dimensions	Without cooler	400(W)×900(D)×696(H)mm
	With cooler (option)	400(W)×971(D)×696(H)mm
Weight	Without cooler	100Kg
	With cooler (option)	120Kg

Sản phẩm tương tự

Đăng nhập