NP200

– Multi input/output, high accuracy (+/-0.1%)
– 30 patterns, 300 segments (1 pattern / 99 segments)
– Heat & cooling PID control
– 3 level PID selection (4 PID groups)
– PID auto-tuning mode 2 types
– Digital input(DI) 7 contacts, User output(UO) 10 contacts
– Communication fuction (RS485/422)

Suffix code

Model	Number		Function
NP200	□	□	Programmable Temperature Controller
Control Type	0		Normal type (heating)
	1		Heating/Cooling type (synchronous control type)
Option		0	None
		1	Communication function (RS485/422)
		2	Contact input 4 contacts
		3	Communication Function (RS422 / 485) + Contact input 4 contacts

· Specification

Model	NP200
Appearance
W × H × D (mm)	96 × 96 × 100
Power voltage	100 – 240 V a.c (50/60 ㎐), voltage fluctuation rate ± 10 %
Power consumption	Max. 6.0 W / Max. 10 VA
Input	T.C : K,J,E,T,R,B,S,L,N,U,W,PLII R.T.D : Pt100(KS/IEC), KPt100(KS) DC Voltage input : 1 – 5 V, -10 – 20 mV, 0 – 100 mV, DC Current input : 4 – 20 mA(attach 250 Ω external resistor)
Control output	Relay output, voltage output (SSR), current output (SCR)
Control operation	PID control,  ON/OFF control
Alarm type	High/Low, High/Low deviation
Communication method	RS 485/422, 2-wire half-duplex or 4-wire hlaf-duplex
Setting	By front Shift up, Down keys
Display	PV : Digital LED , SV : Graphic LCD
Accuracy	0.1 % of Full Scale
Setting accuracy	1 or 0.1% (According to input range)
External control	4 alarm output (Run, Reset, Step, Hold)
Number of pattern contact	30 patterns, Up to 99 segments per pattern can be set
Segment	300 segment
Set time unit of program	Hours, Minutes, seconds
Sampling cycle	100 ms
Insulation resistance	Min. 500 V a.c 20 ㏁
Dielectric strength	2300 V a.c 50/60 ㎐ for 1 min (between 1st and 2nd terminals and between 1st terminal and ground)
Ambient temperature & humidity	0 ~ 50 ℃, 35 ~ 85 % R.H. (without condensation)
Weight	Approx. 696 g