English
Suffix code
| Model | Code | Information | |||
| PEN – |  |
|
|
Photo Sensor | |
| Sensing method and Sensing distance | T | 10 | Through – beam | 10 m | |
| M | 5 | Retro – reflection | 0.1 – 5 m | ||
| R | 700 | Diffuse – reflection | 700 mm | ||
| Power supply voltage | A | 24 – 240 V AC/DC ±10 % 50/60 ㎐ | |||
· Specification
| Appearance |
|
||||||||
| Model | PEN-T10A | PEN-R700A | PEN-M5A | ||||||
| Type | Through beam | Diffuse reflection | Retro reflection | ||||||
| Sensing distance | 10 m | 700 mm | 0.1 ~ 5 m | ||||||
| Sensing object | Ø 20 mm (opaque body) |
200 x 200 ㎜ (White non- glossy paper) |
Ø 60 mm (opaque body) |
||||||
| Power Supply voltage | 24 – 240 V 50 Hz / 60 Hz AC ± 10 % | ||||||||
| Power consumption | Emitter:max 1W Receiver:max 2W |
max 2 W | |||||||
| Operation mode | Light ON / Dark ON ※ selectable by mod V/R | ||||||||
| Sensitiviry ad | – | Built-in the sensitivity control V/R |
|||||||
| Control output |
|
||||||||
| Response time | max 20 ms | ||||||||
| Response range | – | within 15% of detect range |
– | ||||||
| Light source | infrared rays LED(alteration) | ||||||||
| Material | Case : Heat resistance ABX, Lens : P.C | ||||||||
| Connection method | Cable extended type (Number of wire : 5P, Diameter : Ø 6 ㎜, Length : 2 ㎜) ※ Emitter 2P | ||||||||
| Ambient light | sun light : 11000 Lux below, Incandescent lamp : 3000 Lux below | ||||||||
| Ambient temperature | -20 ~ 65 °C (surrounding storge temperature : -25 ~ 70 °C) | ||||||||
| Ambient humidity | 35 ~ 85 % RH (with no condensation) | ||||||||
| Dielectric Strenght | AC 1000 V 1 minute | ||||||||
| Insulation resistance | 20MΩ Min. (At 500V DC between code and case, adjusting switch and case) | ||||||||
