English
PI2602
Flush pressure sensor with display PI2602
| Product characteristics PI2602 | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Output signal | switching signal; analogue signal; IO-Link; (configurable) | ||||||||||
| Measuring range |
|
||||||||||
| Process connection | threaded connection G 1 external thread sealing cone | ||||||||||
| Application | |||||||||||
| Special feature | Gold-plated contacts | ||||||||||
| Application | flush mountable for the food and beverage industry | ||||||||||
| Media | viscous media and liquids with suspended particles; liquids and gases | ||||||||||
| Conditionally suitable for | use in gases at pressures > 25 bar only on request | ||||||||||
| Medium temperature [°C] | -25…125; (145 max. 1h) | ||||||||||
| Min. bursting pressure |
|
||||||||||
| Pressure rating |
|
||||||||||
| Vacuum resistance [mbar] | -1000 | ||||||||||
| Type of pressure | relative pressure; vacuum | ||||||||||
| No dead space | yes | ||||||||||
Electrical data |
|||||||||||
| Min. insulation resistance [MΩ] | 100; (500 V DC) | ||||||||||
| Protection class | III | ||||||||||
| Reverse polarity protection | yes | ||||||||||
| Integrated watchdog | yes | ||||||||||
| 2-wire | |||||||||||
| Operating voltage [V] | 20…32 DC | ||||||||||
| Current consumption [mA] | 3.6…21 | ||||||||||
| Power-on delay time [s] | 1 | ||||||||||
| 3-wire | |||||||||||
| Operating voltage [V] | 18…32 DC | ||||||||||
| Current consumption [mA] | < 45 | ||||||||||
| Power-on delay time [s] | 0.5 | ||||||||||
| Inputs / outputs | |||||||||||
| Number of inputs and outputs | Number of digital outputs: 2; Number of analogue outputs: 1 | ||||||||||
| Outputs | |||||||||||
| Total number of outputs | 2 | ||||||||||
| Output signal | switching signal; analogue signal; IO-Link; (configurable) | ||||||||||
| Electrical design | PNP/NPN | ||||||||||
| Number of digital outputs | 2 | ||||||||||
| Output function | normally open / normally closed; (parameterisable) | ||||||||||
| Number of analogue outputs | 1 | ||||||||||
| Analogue current output [mA] | 4…20, invertible; (scalable) | ||||||||||
| Short-circuit protection | yes | ||||||||||
| Type of short-circuit protection | pulsed | ||||||||||
| Overload protection | yes | ||||||||||
| 2-wire | |||||||||||
| Max. load [Ω] | 300 | ||||||||||
| 3-wire | |||||||||||
| Max. voltage drop switching output DC [V] | 2 | ||||||||||
| Permanent current rating of switching output DC [mA] | 250 | ||||||||||
| Switching frequency DC [Hz] | 125 | ||||||||||
| Max. load [Ω] | (Ub – 10 V) / 20 mA | ||||||||||
| Measuring/setting range | |||||||||||
| Measuring range |
|
||||||||||
| Set point SP |
|
||||||||||
| Reset point rP |
|
||||||||||
| Analogue start point |
|
||||||||||
| Analogue end point |
|
||||||||||
| In steps of |
|
||||||||||
| Factory setting |
|
||||||||||
| Accuracy / deviations | |||||||||||
| Switch point accuracy [% of the span] | < ± 0,5; (Turn down 1:1) | ||||||||||
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K; Turn down 1:1) | ||||||||||
| Characteristics deviation [% of the span] | < ± 0,5; (Turn down 1:1 , linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) | ||||||||||
| Linearity deviation [% of the span] | < ± 0,15; (Turn down 1:1) | ||||||||||
| Hysteresis deviation [% of the span] | < ± 0,15; (Turn down 1:1) | ||||||||||
| Long-term stability [% of the span] | < ± 0,1; (Turn down 1:1; per year) | ||||||||||
| Temperature coefficient zero point [% of the span / 10 K] | < ± 0,2; (0…70 °C) | ||||||||||
| Temperature coefficient span [% of the span / 10 K] | < ± 0,2; (0…70 °C) | ||||||||||
| Response times | |||||||||||
| Damping for the switching output dAP [s] | 0…30 | ||||||||||
| Damping for the analogue output dAA [s] | 0.01…99.99 | ||||||||||
| 2-wire | |||||||||||
| Step response time analogue output [ms] | 45 | ||||||||||
| 3-wire | |||||||||||
| Min. response time of switching output (dAP) [ms] | 3 | ||||||||||
| Step response time analogue output [ms] | 7 | ||||||||||
| Interfaces | |||||||||||
| Communication interface | IO-Link | ||||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||||
| IO-Link revision | 1.0 | ||||||||||
| Profiles | no profile | ||||||||||
| SIO mode | yes | ||||||||||
| Required master port type | A | ||||||||||
| Process data analogue | 1 | ||||||||||
| Process data binary | 2 | ||||||||||
| Min. process cycle time [ms] | 2.3 | ||||||||||
| Supported DeviceIDs |
|
||||||||||
Operating conditions |
|||||||||||
| Ambient temperature [°C] | -25…80 | ||||||||||
| Storage temperature [°C] | -40…100 | ||||||||||
| Protection | IP 67; IP 68; IP 69K | ||||||||||
| Tests / approvals | |||||||||||
| EMC |
|
||||||||||
| Shock resistance |
|
||||||||||
| Vibration resistance |
|
||||||||||
| MTTF [years] | 154 | ||||||||||
| Note on approval |
|
||||||||||
| Mechanical data | |||||||||||
| Weight [g] | 374 | ||||||||||
| Materials | stainless steel (1.4404 / 316L); FKM; PTFE; PBT; PEI; PFA | ||||||||||
| Materials (wetted parts) | ceramics (99.9 % Al2O3); stainless steel (1.4435 / 316L); surface characteristics: Ra < 0,4 / Rz 4; PTFE | ||||||||||
| Min. pressure cycles | 100 million | ||||||||||
| Process connection | threaded connection G 1 external thread sealing cone | ||||||||||
| Displays / operating elements | |||||||||||
| Display |
|
||||||||||
| Display unit | bar; MPa; psi; % of the span | ||||||||||
| Remarks | |||||||||||
| Pack quantity | 1 pcs. | ||||||||||
| Electrical connection | |||||||||||
| Connection | Connector: 1 x M12; Contacts: gold-plated | ||||||||||
