English
PY7000
Pressure sensor with display PY7000
| Product characteristics | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Output signal | switching signal; IO-Link; (configurable) | ||||||||||
| Measuring range |
|
||||||||||
| Process connection | flange internal thread:G 1/4; internal thread:M6 | ||||||||||
Application |
|||||||||||
| Special feature | Gold-plated contacts | ||||||||||
| Design | with flange adapter | ||||||||||
| Media | liquids and gases | ||||||||||
| Conditionally suitable for | use in gases at pressures > 25 bar only on request | ||||||||||
| Medium temperature [°C] | -25…80 | ||||||||||
| Min. bursting pressure |
|
||||||||||
| Pressure rating |
|
||||||||||
| Type of pressure | relative pressure | ||||||||||
| Electrical data | |||||||||||
| Operating voltage [V] | 18…36 DC; (according to EN 50178 SELV/PELV) | ||||||||||
| Current consumption [mA] | < 50 | ||||||||||
| Min. insulation resistance [MΩ] | 100; (500 V DC) | ||||||||||
| Protection class | III | ||||||||||
| Reverse polarity protection | yes | ||||||||||
| Overvoltage protection | yes; (< 40 V) | ||||||||||
| Power-on delay time [s] | 0.3 | ||||||||||
| Integrated watchdog | yes | ||||||||||
| Inputs / outputs | |||||||||||
| Number of inputs and outputs | Number of digital outputs: 2 | ||||||||||
| Outputs | |||||||||||
| Total number of outputs | 2 | ||||||||||
| Output signal | switching signal; IO-Link; (configurable) | ||||||||||
| Electrical design | PNP/NPN | ||||||||||
| Number of digital outputs | 2 | ||||||||||
| Output function | normally open / normally closed; (parameterisable) | ||||||||||
| Max. voltage drop switching output DC [V] | 2 | ||||||||||
| Permanent current rating of switching output DC [mA] | 250 | ||||||||||
| Switching frequency DC [Hz] | < 170 | ||||||||||
| Short-circuit protection | yes | ||||||||||
| Type of short-circuit protection | pulsed | ||||||||||
| Measuring/setting range | |||||||||||
| Measuring range |
|
||||||||||
| Set point SP |
|
||||||||||
| Reset point rP |
|
||||||||||
| In steps of |
|
||||||||||
| Factory setting |
|
||||||||||
Accuracy / deviations |
|||||||||||
| Switch point accuracy [% of the span] | < ± 0,5 | ||||||||||
| Repeatability [% of the span] | < ± 0,1; (with temperature fluctuations < 10 K) | ||||||||||
| Characteristics deviation [% of the span] | < ± 0,5; (linearity, incl. hysteresis and repeatability , limit value setting to DIN EN IEC 62828-1) | ||||||||||
| Hysteresis deviation [% of the span] | < ± 0,25 | ||||||||||
| Long-term stability [% of the span] | < ± 0,05; (per 6 months) | ||||||||||
| Temperature coefficient zero point [% of the span / 10 K] | 0,2; (0…80 °C) | ||||||||||
| Temperature coefficient span [% of the span / 10 K] | 0,2; (0…80 °C) | ||||||||||
| Response times | |||||||||||
| Delay time programmable dS, dr [s] | 0; 0,2…50 | ||||||||||
| Software / programming | |||||||||||
| Parameter setting options | hysteresis / window; normally open / normally closed; diagnostic function; switching logic; switch-on/switch-off delay; Damping; Display unit | ||||||||||
| Interfaces | |||||||||||
| Communication interface | IO-Link | ||||||||||
| Transmission type | COM2 (38,4 kBaud) | ||||||||||
| IO-Link revision | 1.1 | ||||||||||
| SDCI standard | IEC 61131-9 CDV | ||||||||||
| Profiles | no profile | ||||||||||
| SIO mode | yes | ||||||||||
| Required master port type | A | ||||||||||
| Process data analogue | 1 | ||||||||||
| Process data binary | 2 | ||||||||||
| Min. process cycle time [ms] | 2.3 | ||||||||||
| Supported DeviceIDs |
|
||||||||||
| Operating conditions | |||||||||||
| Ambient temperature [°C] | -20…80 | ||||||||||
| Storage temperature [°C] | -40…100 | ||||||||||
| Protection | IP 67 | ||||||||||
| Tests / approvals | |||||||||||
| EMC |
|
||||||||||
| Shock resistance |
|
||||||||||
| Vibration resistance |
|
||||||||||
| MTTF [years] | 220 | ||||||||||
| Pressure Equipment Directive | Sound engineering practice; can be used for group 2 fluids; group 1 fluids on request | ||||||||||
Mechanical data |
|||||||||||
| Weight [g] | 382.5 | ||||||||||
| Materials | stainless steel (1.4301 / 304); PC; PBT; PEI; FKM | ||||||||||
| Materials (wetted parts) | steel (1.4104 / 430F); ceramics; FKM | ||||||||||
| Min. pressure cycles | 50 million | ||||||||||
| Process connection | flange internal thread:G 1/4; internal thread:M6 | ||||||||||
| Restrictor element integrated | yes | ||||||||||
| Displays / operating elements | |||||||||||
| Display |
|
||||||||||
| Remarks | |||||||||||
| Pack quantity | 1 pcs. | ||||||||||
| Electrical connection | |||||||||||
| Connector: 1 x M12; Contacts: gold-plated | |||||||||||
