English
Suffix code
| Model | Code | Information | |||||
| UP |  |
– |
|
|
|
|
inductive type proximity sensor |
| Sensing area size |
8 | M8 | |||||
| 12 | M12 | ||||||
| 18 | M18 | ||||||
| 30 | M30 | ||||||
| Structure type | RM | Round type Shield | |||||
| RD | Round type None Shield | ||||||
| RLM | Long round type shield(M8 and M12 are excluded) | ||||||
| RLD | Long round type None shield (M8 and M12 are excluded) | ||||||
| Sensing Distance | 1.5 | Only for UP8-RM1.5 | |||||
| 2 | Only for UP8-RD2, UP12-RM2 | ||||||
| 4 | Only for UP12-RD4 | ||||||
| 5 | Only for UP18-RM5, UP18-RLM5 | ||||||
| 8 | Only for UP18-RD, UP18-RLD | ||||||
| 10 | Only for UP30-RM10, UP30-RLM10 | ||||||
| 15 | Only for UP30-RD15, UP30-RLD15 | ||||||
| Power and Output type | N | D.C NPN output | |||||
| P | D.C PNP output | ||||||
| A | A.C 2 wire type | ||||||
| T | D.C 2 wire type(Polarity) | ||||||
| U | D.C 2 wire type(No polarity) ※ But M8 is excluded | ||||||
| Output state | A | Normal open(N.O) | |||||
| C | Normal close(N.C) | ||||||
| Connection structure | * | No indication (Cable type) | |||||
| CR | Relay connector type | ||||||
| C | Connector type | ||||||
| ※ M8 (Ø8) is only available with the cable type |
· Specification
| Inductive D.C 3 Wire type |
| Model | NPN | UP8RM-1.5N |
UP8RD-2N |
UP12RM-2N |
UP12RD-4N |
UP18RM-5N |
UP18RD-8N |
| PNP | UP8RM-1.5P |
UP8RD-2P |
UP12RM-2P |
UP12RD-4P |
UP18RM-5P |
UP18RD-8P |
|
| Size | M8 | M12 | M18 | ||||
| Shield | Shield | None shield | Shield | None shield | Shield | None shield | |
| Standard sensing object (mm) | Iron 8 X 8 X 1 | Iron 12 X 12 X 1 | Iron 18X18X1 | Iron 25 X 25 X 1 | |||
| Sensing distance | 1.5 mm | 2 mm | 2 mm | 4 mm | 5 mm | 8 mm | |
| Setting distance | 0 ~ 1.2 mm | 0 ~ 1.6 mm | 0 ~ 1.6 mm | 0 ~ 3.2 mm | 0 ~ 4 mm | 0 ~ 6.4 mm | |
| Hysteresis | Less than 10% of sensing distance | ||||||
| Response frequency | 800 Hz | 800 Hz | 400 Hz | 350 Hz | 200 Hz | ||
| Power supply voltage | 12 ~ 24 V d.c (Usable voltage range 5 – 35V d.c) | ||||||
| Control output | Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage : Max 1.5 V | ||||||
| Current consumption | Max 6 mA | ||||||
| Operation indication | Red LED | ||||||
| Protective circuit | Power reversely comeded prodective circuit, surge prote ctive circuit and over current protective circuit are built in. |
||||||
| connection structure | Cable type (standard cable length 2m), Relay connector type, Connector type | ||||||
| Material | Case: stainless, Sensing surface: PBT, Cable holder: Polyester elastomer | Case: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer |
|||||
| Weight | Cable type | approx. 60g | approx. 60g | approx. 70g | approx. 70g | approx. 120g | approx. 120g |
| Relay connector type | None | None | approx. 30g | approx. 30g | approx. 80g | approx. 80g | |
| Connector type | None | None | approx. 30g | approx. 30g | approx. 60g | approx. 60g | |
| Inductive D.C 3 Wire type |
| Model | NPN | UP18RLM-5N |
UP18RLD-8N |
UP30RM-10N |
UP30RD-15N |
UP30RLM-10N |
UP30RLD-15N |
| PNP | UP18RLM-5P |
UP18RLD-8P |
UP30RM-10P |
UP30RD-15P |
UP30RLM-10P |
UP30RLD-15P |
|
| Size | M18 | M30 | M30 | ||||
| Shield | Shield | None shield | Shield | None shield | Shield | None shield | |
| Standard sensing object (mm) | Iron 18 X 18 X 1 | Iron 25 X 25 X 1 | Iron 30 X 30 X 1 | Iron 45 X 45 X 1 | Iron 30 X 30 X 1 | Iron 45 X 45 X 1 | |
| Sensing distance | 5 mm | 8 mm | 10 mm | 15 mm | 10 mm | 15 mm | |
| Setting distance | 0 ~ 4 mm | 0 ~ 6.4 mm | 0 ~ 8 mm | 0 ~ 12 mm | 0 ~ 8 mm | 0 ~ 12 mm | |
| Hysteresis | Less than 10% of sensing distance | ||||||
| Response frequency | 350 Hz | 200 Hz | 250 Hz | 100 Hz | 250 Hz | 100 Hz | |
| Power supply voltage | 12 ~ 24 V d.c (Usable voltage range 5 – 35V d.c) | ||||||
| Control output | Open/Close capacitance : 200 mA Max. (Resistive load), Residual : Max1.5 V | ||||||
| Current consumption | Max 6 mA | ||||||
| Operation indication | Red LED | ||||||
| Protective circuit | Power reversely connected protective circuit, Surge protective circuit and over current protective circuit are bult in. |
||||||
| connection structure | Cable type (standard cable length 2m), Relay connector type, Connector type | ||||||
| Material | Case : brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer | ||||||
| Weight | Cable type | approx. 140g | approx. 140g | approx. 170g | approx. 170g | approx. 220g | approx. 220g |
| Relay connector type | approx. 100g | approx. 100g | approx. 130g | approx. 130g | approx. 180g | approx. 180g | |
| Connector type | approx. 80g | approx. 80g | approx. 150g | approx. 150g | approx. 200g | approx. 200g | |
| Inductive D.C 2 wire type (Polrity/No polarity) |
| Model | Polarity | UP8RM-1.5T |
UP8RD-2T |
UP12RM-2T |
UP12RD-4T |
UP18RM-5T |
UP-18RD-8T |
| Non Polarity | – |
– | UP12RM-2U |
UP12RD-4U |
UP18RM-5U |
UP-18RD-8U |
|
| Size | M8 | M12 | M18 | ||||
| Shield | Shield | None shield | Shield | None shield | Shield | None shield | |
| Standard sensing object (mm) | Iron 8 X 8 X 1 | Iron 12 X 12 X 1 | Iron 18X18X1 | Iron 25X25X1 | |||
| Sensing distance | 1.5 mm | 2 mm | 2 mm | 4 mm | 5 mm | 8 mm | |
| Setting distance | 0 ~ 1.2 mm | 0 ~ 1.6 mm | 0 ~ 1.6 mm | 0 ~ 3.2 mm | 0 ~ 4 mm | 0 ~ 6.4 mm | |
| Hysteresis | Less than 10% of sensing distance | ||||||
| Response frequency | 800 Hz | 800 Hz | 400 Hz | 350 Hz | 200 Hz | ||
| Power supply voltage | 12 ~ 24 V d.c (Usable voltage range 10 – 30 V d.c) | ||||||
| Control output | Open/Close capacitance : 100 mA Max.(Resistive load), Residual voltage: T (polarty) : max 3.5 V, U (No polarity): max5V |
||||||
| Leakage current | Max 1 mA | ||||||
| Operation indication | Red LED | ||||||
| Protective circuit | Power reversely connected protective circuit, surge protective circuit and over current protective circuit are built in. |
||||||
| connection structure | Cable type(standard cable length 2 m), Relay connector type, Connector type | ||||||
| Material | Case: stainless, Sensing surface:PBT, Cable holder: Polyester elastomerr | Case: brass(chrome plating), Sensing surface: PBT, Cable holder: Polyester elastomer | |||||
| Weight | Cable type | approx. 60g | approx. 70g | approx. 120g | approx. 120g | ||
| Relay connector type | None | approx. 30g | approx. 80g | approx. 80g | |||
| Connector type | None | approx. 30g | approx. 60g | approx. 60g | |||
| Inductive D.C 2 wire type |
| Model | Polarity | UP18RLM-5T |
UP18RLD-8T |
UP30RM-10T |
UP30RD-15T |
UP30RLM-10T |
UP30RLD-15T |
| Non Polarity | UP18RLM-5U |
UP18RLD-8U |
UP30RM-10U |
UP30RD-15U |
UP30RLM-10U |
UP30RLD-15U |
|
| Size | M18 | M30 | M30 | ||||
| Shield | Shield | None shield | Shield | None shield | Shield | None shield | |
| Standard sensing object (mm) | iron 18 X 18 X 1 | iron 25 X 25 X 1 | iron 30 X 30 X 1 | iron 45 X 45 X 1 | iron 30 X 30 X 1 | iron 45 X 45 X 1 | |
| Sensing distance | 5 mm | 8 mm | 10 mm | 15 mm | 10 mm | 15 mm | |
| Setting distance | 0 ~ 4 mm | 0 ~ 6.4 mm | 0 ~ 8 mm | 0 ~ 12 mm | 0 ~ 8 mm | 0 ~ 12 mm | |
| Hysteresis | Less than 10% of sensing distance | ||||||
| Response frequency | 350 Hz | 200 Hz | 250 Hz | 100 Hz | 250 Hz | 100 Hz | |
| Power supply voltage | 12 ~ 24 V d.c (Usable voltage range 10 – 30 V d.c) | ||||||
| Control output | Open/Close capacitance : 100 mA Max. (Resistive load), Residual voltage: T(Polarity) : max 3.5 V, U(No polarity) :max 5 V |
||||||
| Leakage current | Max 1 mA | ||||||
| Operation indication | Red LED | ||||||
| Protective circuit | Power reversely connected protective circuit, surge protective circuit and over current protective circuit are built in. |
||||||
| connection structure | Cable type(standard cable length2 m), Relay connector type, Connector type | ||||||
| Material | Case: brass(chrome plating), Sensing surface: PBT, Cable holder : Polyester elastomer | ||||||
| Weight | Cable type | approx. 140g | approx. 140g | approx. 170g | approx. 220g | ||
| Relay connector type | approx. 100g | approx. 100g | approx. 130g | approx. 180g | |||
| Connector type | approx. 80g | approx. 80g | approx.110g | approx. 200g | |||
| Inductive A.C 2 wire type |
| Model | For A.C | UP12RM-2A |
UP12RD-4A |
UP18RM-5A |
UP18RD-8A |
UP18RLM-5A |
| Size | M12 | M18 | M18 | |||
| Shield | Shield | None shield | Shield | None shield | Shield | |
| Standard sensing object (mm) | Iron 12 x 12 x 1 mm | Iron 18 x 18 x 1 mm | Iron 25 x 25 x 1 mm | Iron 18 x 18 x 1 mm | ||
| Sensing distance | 2 mm | 4 mm | 5 mm | 8 mm | 5 mm | |
| Setting distance | 0 ~ 1.6 mm | 0 ~ 3.2 mm | 0 ~ 4.0 mm | 0 ~ 6.4 mm | 0 ~ 4.0 mm | |
| Hysteresis | Less than 10% of sensing distance | |||||
| Response frequency | 20 Hz | |||||
| Power supply voltage | 100 ~ 240 V a.c(Usable voltage range 90 – 250 V a.c) | |||||
| Control output | Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V | |||||
| Leakage current | Max 2.2 mA | |||||
| Operation indication | Red LED | |||||
| Protective circuit | Surge Protective circuit built in. | |||||
| connection structure | Cable type(standard cable length 2 m), Relay connector type, Connector type | |||||
| Material | Case: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer | |||||
| Weight | Cable type | approx. 70g | approx. 70g | approx. 120g | approx. 140g | |
| Relay connector type | approx. 30g | approx. 30g | approx. 80g | approx. 100g | ||
| Connector type | approx. 30g | approx. 30g | approx. 60g | approx. 80g | ||
| Inductive A.C 2 wire type |
| Model | For A.C | UP18RLD-8A |
UP30RM-10A |
UP30RD-15A |
UP30RLM-10A |
UP30RLD-15A |
| Size | M18 | M30 | M30 | |||
| Shield | None shield | Shield | None shield | Shield | None shield | |
| Standard sensing object (mm) | Iron 25 x 25 x 1 mm | Iron 30 x 30 x 1 mm | Iron 45 x 45 x 1 mm | Iron 30 x 30 x 1 mm | Iron 45 x 45 x 1 mm | |
| Sensing distance | 8 mm | 10 mm | 15 mm | 10 mm | 15 mm | |
| Setting distance | 0 ~ 6.4 mm | 0 ~ 8.0 mm | 0 ~ 12.0 mm | 0 ~ 8.0 mm | 0 ~ 12.0 mm | |
| Hysteresis | Less than 10% of sensing distance | |||||
| Response frequency | 20 Hz | |||||
| Power supply voltage | 100 ~ 240 V a.c(Usable voltage range 90 – 250 V a.c) | |||||
| Control output | Open/Close capacitance : 200 mA Max. (Resistive load), Residual voltage: Max 10 V | |||||
| Leakage current | Max 2.2 mA | |||||
| Operation indication | Red LED | |||||
| Protective circuit | Surge Protective circuit built in. | |||||
| connection structure | Cable type(standard cable length 2 m), Relay connector type, Connector type | |||||
| Material | Case: brass (chrome plating), Sensing surface:PBT, Cable holder :Polyester elastomer | |||||
| Weight | Cable type | approx. 140g | approx. 170g | approx. 170g | approx. 220g | approx. 220g |
| Relay connector type | approx. 100g | approx. 130g | approx. 130g | approx. 180g | approx. 180g | |
| Connector type | approx. 80g | approx. 150g | approx. 150g | approx. 200g | approx. 200g | |
