SM100 Board type multi channel Temperature controller

– Installation space is small due to board stacking method.
– 20 channels integral digital temperature controller.
– ± 0.5 % of full scale display accuracy.
– Various alarm functions. (3 contact outputs)
– Communication functions. (RS485 / 422, RS232C)

Suffix code

Model	Code			Content
SM100-				Board type multi channel Temperatue controller
Input type	K			K  thermocouple input
	P			Pt100 Ω RTD input
Output form		N		No control output (Indication only)
		A		Control output (SSR driving voltage pulse output)
Number of control contacts (Number of channels)			12	12 channels
			16	16 channels
			20	20 channels

· Specification

[ Input ]

Model		SM100-□□ 12	SM100-□□ 16	SM100-□□ 20
Number of channels		12 channels	16 channels	20 chaneels
External connection structure		Connection by terminal block
Measurement input	Input type	Thermocouple (K), range : -199.9 ~ 999.9 ℃ RTD (Pt100 Ω IEC 751), range : -199.0 ~ 640.0 ℃
	Display accuracy	±0.5 % of F.S (※ ±0.5 % of max. range)
	RJC compensation accuracy	±3.5 ℃
	Sampling cycle	1 sec
	Input filter	0 ~ 120.0 sec
	Burn-out action	Thermocouple : Up Scale RTD : Up Scale
	Input correction	±1200.0 ℃
Contact input	Internal switch	RUN / STOP by internal DIP switch

[ Setting and display ]

Model		SM100-□□ 12	SM100-□□ 16	SM100-□□ 20
Setting and display	Setting type	Setting by communication program
	Number of settings	12 contacts	16 contacts	20 contacts
	Memory storage	Store by semiconductor
	Display LED	Power indication, communication indication, control output indication

[ Control output ]

Control Output	Output type	SSR driving voltage pulse output (driving voltage : 12 Vd.c., load resistance : min. 600 Ω)
	Control operation	Time proportional  PID or ON/OFF control
	Proportional cycle	1 ~ 100 sec.
	Proportional band (P)	0 ~ 1200.0 ℃
	Intergral time (I)	1 ~ 3600 sec.
	Derivative time (D)	1 ~ 3600 sec.
	ARW (Anti reset wind-up)	0.1 ~100.0 %, ※ “0” setting(Auto)
	Hysteresis	0 ~ 120.0 ℃ (※ During ON/OFF control)
	Manual reset	0.0 ~ 100.0 % (※ During ON/OFF control)
	Emergency output	0.0 ~ 100.0 %
	Output limit	0 ~ 100 %
	Control output operation	Cooling control (direct action) / heating control (reverse action) selection

– RS485 / 422 Communication

Communication specification	Communication standard	RS422/485 (4-Wire type)
	Network	Multi-drop
	Communication type	Half duplex
	Max. number of connections	15 devices (Including host computer) ※Address setting by 1 ~ F, HEX BCD
	Communication distance	max. 1.2 ㎞
	Transmission spped	19200 bps
	Data length	8 Bit
	Parity bit	Even
	Stop bit	1 bit
	Communication protocol	PC-Link with SUM

– RS232C Communication

Communication standard	RS-232C
Communication distance	max. 15m
Transmission speed	19200 bps
Data length	8 bit
Parity bit	even
Stop bit	1 bit
Communication protocol	PC-Link

[ General Specification ]

Specification	Power voltage	100 – 240 Va.c. (50 – 60 ㎐)
	Power consumption	max. 25 VA
	Insulation resistance	min. 20 ㏁  (500 Vd.c. Mega) between power terminal and ground
	Dielectric strength	2000 Va.c. 1 min, between power terminal and ground
	Ambient temperature & humidity	0 ~ 50 ℃, 20 ~ 85 % RH (without condensation)
	Storage temperature	-20 ~ 70 ℃ (without condensation)
	Vibration resistance	10 ~ 55 ㎐ 19.6 ㎨
	Shock resistance	196 ㎨
	Weight	1270 g (With terminal , without box)