Telestream Model MPX2-25, waveform monitor SDI, IP

– ST 2110, ST 2022-7, ST 2022-6 and PTP analysis at 10G and 25G

– 4 simultaneous SDI inputs – SD-SDI, HD-SDI, 3G-SDI, 6G-SDI, 12G-SDI

– SD, HD, 4K and 8K resolutions and formats

– Audio analysis and support for Dolby E/D/D+, Surround sound displays, ST 2110-30 and ST 2110-31

– Objective measurement of HDR and gamma curves including Slog-2, Slog-3, Log-C, HLG, PQ content

– Wide Color Gamut measurement and error detection for Rec. 709, DCI-P3, Rec.2020 color spaces

– Customizable user interface with up to 8 tiles on dual screen and extended desktop

– Remote access, NMOS routing, Syslog error logging

– http API for easy integration

–         Vector display

–         Lightning display: provides an intuitive X-Y plot of the YPbPr component signal with Y versus Pb in the upper half of the display and -Y versus Pr in the lower half of the display

–         Diamond display

–         Picture display

–         Video Session provides format information for an SDI input the display shows SDI Format, SMPTE 352 Video Payload ID, Bit Level monitoring and CRC Status

–         Audio display Lissajous, Loudness and RTW Surround displays

–         Event Logg shows a list of information related to Alarm events or status information that can be logged relative to Timecode or Precision Time Protocol (PTP)

–         Timing displayp rovides an intuitive way to monitor the currently selected input video timing against a reference signal either Black Burst or Tri[1]level Sync or Precision Time Protocol (PTP).

–         IP Status display provides a simple monitoring of the IP streams present on SFP port 1 & 2 of PRISM and provides useful information on the type of streams present

–         IP Session shows information for Layer 1 & 2, Video, Audio, Data, PTP and NMOS. The user can verify data streams and check syntax information. Requires option IP-MEAS to be installed in the instrument.

–         Packet Interval Time Histogram shows a distribution of how the packets have arrived at the input to PRISM. Certain types of senders will have a characteristic distribution of the packets that can be helpful in diagnosing issues with streams. Requires option IP-MEAS to be installed in the instrument.

–         IP Graphs allows for metrics of the IP stream to be plotted from 60 seconds to 24 hours. This allows the user to track the health of the stream over time and identify possible errors with the signal. IP graphs provide information on Total Bitrate, Session Bitrate, PIT, RTP Sequence Error and other graphs dependent on the type of stream being decoded. Requires option IP-MEAS to be installed in the instrument.

–         Stream Timing can be used to track the timing of the input signal to the PTP reference to ensure that the Sender of the stream is locked to PTP and to track the variations across the network of the stream by PRISM for video, audio and data. Requires option IP-MEAS to be installed in the instrument.

–         PTP Graphs provide a plot of the forward and reverse paths of the PTP messages across the network. The user can select a window between 60 seconds to twenty four hours to monitor the variations over time. Requires option IP-MEAS to be installed in the instrument

–         The CIE display shows the video input plotted as a 1931 or 1976 CIE diagram. This display is used to check the chromaticity of the video signal and determine compliance to the standard color Gamut limits. Requires option PROD to be installed in the instrument

–         The Telestream Stop Display provides a tool to monitor the video signal with a variety of transfer function in a consistent manner. Requires option PROD to be installed in the instrument.

–         Dolby Status display decodes the Dolby metadata present within a Dolby E, D or D+ signal. The AUD option is required and if the user want to decode the Dolby signal option DLBY is required.

–         Datalist display can be used to view the samples of the SDI signals. The user can search through the data for Start of Active Video (SAV) or End of Active Video (EAV) or the next ANC Data packet. Option QC or ENG is required for this application

–         ANC Session provides a Watchlist of the available Ancillary Data types present within the signal. Option QC or ENG is required for this application.

–         The Eye Display provides a measurement of the SDI physical layer for Timing and Alignment with automated measurements. The Eye Display feature is available in MPS300 and MPD300 as standard and Requires option PHY for SD/HD/3G SDI for MPI2-25 and MPX2-25. Option FMT-4K to enable the support for 6G and 12G SDI.

–         The Jitter Display can be used in conjunction with the Eye display to measure the physical layer of the SDI signal

–         IP Generator provides a simple test pattern generator for ST2110 for color bars and audio tones. Requires GEN option

–         SDI Generator provides a simple test pattern generator with color bar test signal. Requires GEN option

–         Kích thước: 4.45 x 48.26 x 42.14 cm

–         Trọng lượng: 3.9Kg

Các chức năng có sẵn kèm theo máy: Waveform, Vector, Diamond, Lightning, Picture, Video session, Event Log, Timing, IP Status.