TH300

Suffix code

Model	Code		Information
TH300			Programmable Temperature&Humidity controller (DIN 96 × 96)
Communication	1		RS232C communication
	2		RS485 / 422 communication
Language (optional)		1	Korean and English (Standard type)
		2	English and Chinese (Simplified Chinese Characters)
		3	English and Chinese (Traditional Chinese Characters)

· Specification

[Input]

Temperature sensor (Dry)		RTP (Pt100 Ω) or 0 – 5 V DC ※ 4 – 20 ㎃ DC (external resistance 250Ω) ※ Pt100 Ω (IEC 751)
Humidity sensor (Wet)
Sampling time		500 ms
Measurement range		Temperature : -100.0 ~ 500.0 ℃
		Humidity : 0.0 ~ 100.0 % RH
Digital Input (DI)		4 contacts (1a X 4)

[Function]

Display accuracy		Temperature : ±0.2 % of FS Humidity : ±2 % of FS
Insulation resistance		500 V DC min 10 ㏁ (between the primary and secondary terminal, between the primary / secondary terminal and earth terminal)
Dielectric strength		2500 V AC 50 / 60 ㎐ (between the primary and secondary terminal)

[Operation environment]

Ambient temperature	0 ~ 50 ℃
Ambient humidity	20 ~ 90 % RH (without dew condensation)
Storage temperature	-25 ~ 70 ℃
Vibration resistance	10 – 55 ㎐, amplitude 0.75 mm, 3 directions 4 times, 5 min/cycle.
Shock resistance	147 ㎨, 3 directions 3 times.
Dimension	96(W) X 96(H) X 100(D)
Weight	approx. 582 kg (body + fastener)

[Standard specification]

Power supply voltage	100 -240 V AC, voltage fluctuation : ±10 %
Power frequency	50 – 60 ㎐
Power consumption	10 VA max
Ambient temperature	0 ~ 50 ℃
Ambient humidity	20 ~ 90 % RH (No dew condensation allowed)
Storage temperature	-25 ~ 70 ℃
Vibration resistance	10 – 55 ㎐, amplitude 0.75 mm, 3 directions for 4 times, 5 min/cycle
Shock resistance	147 ㎨, to 3 directions for 3 times
Dimension	96(W) X 96(H)
Weight	Approx. 850 g (included the weight of box)

[Monitor specification]

Screen rating	TFT LCD (70.08 X 52.56 mm : 3.5″)
Number of Pixels	320 X RGB X 240
Back light	Edge Light LED B/L
Back light life expectancy	Approximately 40,000 hours
Touch type	Register type (4 wires)
Language	Korean/English, Korean/Chinese (Simplified Chinese Characters, English/Chinese (Traditional Chinese Characters). *selected by the suffix code

[Communication]

Applicable rating	EIA – RS232C, RS485/422
Max number of connection	RS232C	1 : 1
Max number of connection	RS485/422	32 devices max (includes the master). ※ address 1 ~ 999
Communication type	RS232C	Full Duplex
Communication type	RS485/422	2 wires type half duplex
Synchronous type	RS232, 485/422	Asynchronous mode
	RS232C	Approx. within 10 m
	RS485/422	Approx. within 1.2 km
	RS232C, 485/422	9600 / 19200 / 38400 bps
Data Length	RS232C, 485/422	7/8 Bits
Parity Bit	RS232C, 485/422	NONE / EVEN / ODD
Stop Bit	RS232C, 485/422	1 / 2 Bit (s)
Protocol	RS232C, 485/422	PCLINK / PCLINK + CRC / MODBUS – RTU
Response Time	RS232C, 485/422	0 – 999 ms

[Output]

Control output (OUT)	SSR	ON : 24 V DC pulse voltage, OFF : below 0.1 V DC Pulse voltage(resistive load above 800Ω)
		Cycle time : 1 ~ 1000 sec
Retransmission output (RET)	Temperature	4 – 20 ㎃ DC (resistive load 600 Ω max) present value (PV), output amount (MV), set value(SV) ※ by the internal selection
	Humidity
	Resolving power	7000 max (regarding 4 – 20 ㎃)
	Renewal time	500 ms
Digital output (DO)	Relay	8 contacts (1a X 8 contacts) N.O : 30 V DC 5 A, 240 V AC 5 A
	Transistor	4 contacts (Open collector output). 24 V DC 300 ㎃ max

[Function]

Input	Input compensation	Temperature : -100.00 ~ 100.00 ℃ Humidity : -100.0 ~ 100.0 % RH
	Dry/wet bulb sensor compensation	Compensate the difference between the wet and dry bulb sensor after removing the wit bulb sensor gauze.
	Scaling	DC Voltage (V DC) : Input scaling depending on the range variation.
	Input filter	1 ~ 180 sec
	Input break detection	UP scale (in case of the RTD input), Operation stops when exceeding ±5 % of the range limit.
Control mode	Operation method selection	Constant value control / program control selectable.
Control action	Pattern	100 patterns (100 segments / 1 pattern)
	Segment	2,000 segments max.
	PID group	16 group (temperature 4 zones X humidity 4 zones)
	Auto tuning	Auto tuning depending on the target set value.
	Proportional band	0.00 ~ 600.00 ℃ (ON / OFF control when value is 0.00)
	Integral time	0.00 ~ 6,000 sec (OFF state when time is set to 0)
	Derivative time	0.00 ~ 6,000 sec (OFF state when time is set to 0)
	ON/OFF control	Set the proportional band to 0.0
	Direct/reverse control	Depends on the direct/reverse action of control output.
	Hysteresis	0.1 ~ 600 ℃ (with humidity, wet bulb temperature or replaced value)
Retransmission Output	Temperatureㆍhumidity	4 – 20 ㎃ DC select among the present value(PV), set value(SV), and output amount (MV)
	Scaling	Automatically scales the high and low range (4 – 20 ㎃ DC).
Alarm setting	Set alarm	System alarm : 4 contacts. Alarm 4 contacts per pattern
	Alarm type	High/low alarm, low deviation alarm and etc (20 kinds)
	Absolute alarm	Temperature : -100.00 ~ 500.00 ℃ Humidity : 0.0 ~ 100.0 % RH.
	Deviation alarm	Temperature : -600.00 ~ 600.00 ℃ Humidity : -100.0 ~ 100.0 % RH.
	Hysteresis	Temperature : 0.0 ~ 600.0 ℃ Humidity : 0.0 ~ 100 % RH.
Power backup memory	Saving device	Internal flash and FRAM, Temperature / Humidity each 86,400 point.
	Saving function	Save and restore the program information and set value and save the temperature humidity set value and indication value

Sản phẩm tương tự

Đăng nhập