WELD CHECKEC MM-123A

Liên hệ để biết giá

Features

■ Measuring function of voltage is newly added!

It enables to measure the welding current and voltage at the same time, owing to the new function.
Quality management will be improved by measuring the important factor as voltage that effects welding quality

■ Improved measuring precision

It enables to measure the RMS based on ISO17657 without any exceptions, by adopting dedicated toroidal coils.
Also, measuring of arithmetic mean RMS is available as previous model.

Improved measuring precision

■ Measuring of various types of welding power supplies

Measuring of Single phase AC current, DC inverter, AC inverter, Capacitor discharge, and Transistor type are available.

■ Upper/Lower limit judgement

It enables to set upper/lower limit.
Detection of errors that can occurs welding problems is available.
For example, if detected data is not in the range of upper/lower limit, this new product outputs the error signal.

■ Long time measuring

It’s available for measuring in 3000ms, and this feature is suitable for not only spot welding but also fusing.

■ Communication

The new product offers Ethernet (TCP/IP) and it enables one way / two way communication.
Uniform management at lap top is available by transmitting the monitor data or error data.
The two way communication implements input/output of schedule data.

Specifications

MODEL			MM-123A
Measurement Specification	Current	Range	0.100 to 2.000kA / 1.00 to 20.00kA / 10.0 to 200.0kA
		Items	Peak / RMS* / arithmetic mean RMS
	Voltage	Range	0.30～6.00V / 1.0～20.0V
		Items	Peak / RMS / arithmetic mean RMS
	Measurement time	Range	Max. 3sec(AC) / 2sec(DC) Single phase AC: 0.5 to 150cycle(50Hz) / 0.5 to 180cycle(60Hz) AC inverter type: 0.5 to max. 1500cycle(Depends on welding current frequency) DC inverter type: 0 to 2000ms Transister type: 0.50 to 25.00ms(0.02ms unit) Capasitor discharge type: 0.50 to 9.99ms(in short term) / 5.0 to 99.9ms(in long term)
Judgement	Current / Voltage / Time		31 schedule of upper/lower limit
	No current		Available
Main body Specification	Display		4 figures digital display (7 segment LED)
	Detection method		Toroidal coil, Voltage detection cable (options)
	Power supply		Single-phase 90 to 250 V AC (50/60Hz) / 24 V DC ±10%
	Power consumption		12W
	External data output		Ethernet (Protocol: TCP / IP)
	Ambient temperature / humidity during operation		Temperature 0 to 45℃ / humidity less than 90% (non-condensation)
	Temperature / humidity during transport		Temperature -10 to 55℃ / humidity less than 90% (non-condensation)
	Outer dimensions / Mass		70(W) x 248(D) x 187(H) Not including projections / 2kg

* Based on ISO17657

Configuration of connection

Danh mục: AMADA - MIYACHI Thẻ: WELD CHECKEC MM-123A

WELD CHECKEC MM-123A

Features

Specifications

Configuration of connection

Sản phẩm tương tự

Đăng nhập